DENON Service Bulletin OST-F1341 free download

File name Service Bulletin OST-F1341.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1341 Date: July 3, 2008 _____________________________________________________________ Model: AVR-3808CI Subject: Correction of the Firmware via DPMS (Denon Product Management Server). Symptom: 1) Setup wrong translation in German. 2) Problem for Tuner preset memory. 3) Scroll speed of "Artist" becomes slow when playback music files with DLNA by network-audio. 4) There is no direct "Tuner FM" or "Tuner AM" command (if customer issues tuner command twice accidentally, tuner band will change. This is an issue from an ease of use point of view) 5) MVUP/down (master volume up/down) command can effect zone 2 volume if any zone 2 command has been recently sent. (MVUP command should only effect MAIN ZONE, regardless of what happens in zone 2. IR commands do not exhibit this behavior) 6) Even when the function that allocates DENON Link is not used with MAIN ZONE, a digital signal is not output from ZONE 2 and ZONE 3. 7) The disc where "DolbyDigital" and "TrueHD" are alternately recorded is play backed. And, when "DolbyDigital" and "TrueHD" are continuously changed, the sound is not outputted. 8) When a specific stream sound source of "DTS-HD MA 7.1ch" is play backed by "5.1ch", the sound is distorted. Solution: We corrected the firmware so that no malfunction occurs. METHOD OF UPDATE via DPMS (Denon Product Management Server) ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Read me first! When you already updated the firmware of the unit via "DPMS", it is not necessary to initialize the customer's unit again. At this time, please skip item "7-1 Preparation of the update ". Preparation of the update. We didn't show this preparation Instruction on Instruction Manual. Please explain additional this Instruction to the customers when updating the firmware. Caution: It is necessary to initialize the unit before the update work begins. The customer has to initialize their A/V product. Please update the firmware after you confirm this matter to the customer beforehand. 1) Turn off the "Power switch" of unit. 2) Open the door on the front panel