Riso ti-fr free download

File name ti-fr.pdf

RISOGRAPH SERIES TECHNICAL INFORMATION RISO EUROPE TECHNICAL OPERATIONS DIVISION DATE: MARCH 2000 ISSUE NO. FR008 Rev 2 OUR REF: FRT-006 MODEL: FR3910 INFORMATION CATEGORY ACTION REQUIRED FACTORY MODIFICATION IMMEDIATE ACTION FIELD MODIFICATION NEXT SERVICE CALL SAFETY INFORMATION AS NECESSARY GENERAL INFORMATION X AT INSTALLATION SUBJECT: FR3910 Technical Manual Version December 1999 This information includes only the items different from the FR3950. 1. SPECIFICATION COMPARISON TABLE; FEATURES FR3910 FR3950 Scanning Resolution 300 x 400 dpi 400 x 400 dpi Dot - Screening 2 patterns 4 patterns Book Document Processing No Yes OPTIONAL ACCESSORIES Digitizer III (S) No Yes ADJUSTMENT The following two adjustments are different from FR3950 TPH Voltage Setting Table - The setting table is different from FR3950. Adjustment procedures of TPH voltage for FR3910 are the same as for the other FR models and GR models. Image Elongation/Shrinkage Correction (write pulse motor adjustment). Checking method for image elongation/shrinkage is different from 400dpi machines, and it can not be checked by folding the output test page by 45 degrees as shown in the FR revised technical manual version 1.1 page 16A-3 Page 1 of 5 TECHNICALINFORMATION RISOGRAPH SERIES ISSUE NO. FR008 1. Thermal Power of Thermal Print Head (FR3910) 1. Trun off the power and remove Front right cover. Resistance Voltage 2. Connect a voltmeter between pins TP1(+) and TP2(GND) on 1403 to 1413 15.9 the Power supply PCB. 1414 to 1431 16.0 3. Turning ON Test mode No.77 (TPH/CTL signal), confirm that 1432 to 1449 16.1 1450 to 1467 16.2 the voltage displayed on the voltmeter conforms to the setting 1468 to 1485 16.3 table according to the thermal print head resistance value. 1486 to 1503 16.4 4. If not, adjust VR100/VR101 for Power supply PCBH and 1504 to 1522 16.5 VR401/VR402 for Power supply PCBN. (VR101