Kyocera 2LW-013 free download

File name 2LW-013.pdf

Service Bulletin SB Number: SB 2LW-013 Creation Date: 06/12/2011 Firmware upgrade (Scanner v002.001 and Fax boot/APL Subject: v007.002) Model: FS-3040MFP/3140MFP Item Contents 1 Skipped parts of the Phenomena image on the print-out. If the DP is closed during scanning of the original, when the copy job is started, while opening the DP after placing the original on the contact glass, the following phenomena may occur: 1. Only the leading edge of the image may appear on the print-out. 2. Only the trailing edge of the image may appear on the print-out. This should not occur when copying with the DP. 2 Solenoid motion failure. The DP reverse solenoid may not be released after completing Duplex scanning. Firmware Type Program No. Check SUM Version Status Date Applicable model(s) ENGINE 2LW_1000004001 6EAA 004.001 10/06/2011 FS-3040MFP/3140MFP MAIN 2LW_2F00008003 ---- 008.003 ---------- FS-3040MFP MAIN 2LX_2F00008003 ---- 008.003 ---------- FS-3140MFP SCANNER 2LW_1200002001 ---- 002.001 10/06/2011 FS-3040MFP/3140MFP FAX BOOT/APL 2H9_5500007002 ---- 007.002 ---------- FS-3140MFP Note: Please upgrade all the firmware at the same time. Classification Entire stock rework X In-field modification by case No modification necessary In-field modification at next visit Field measure When the above mentioned phenomena occur, please upgrade the firmware to the latest version. Serial numbers of affected machines Type Serial number FS-3040MFP/3140MFP October 2011 production. The above mentioned changes have been applied to machines produced after the above mentioned production date. KMIS Service Department, Kyocera Mita Europe Page 1 of 1 B382 / SB 2LW-013