DENON Service Bulletin OST-F1177-1 free download

File name Service Bulletin OST-F1177-1.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1177-1 Date: June 14, 2007 _____________________________________________________________ Model: DVD-3930CI, DVD-3930 Subject: Countermeasure for improving the malfunction (See Symptom). Symptom: Video artifacts become visible after a while during de-interlacing with PAL movie material (Only with film material). Solution: The MICON software has been corrected MODIFICATION: Please download the improved program file to your PC and update the MICON software of your customer's unit using the following instruction. The update takes about 8 minutes. Confirmation of the Version: (1) Turn off the Power switch of the unit once. While holding the "PLAY" and "OPEN/CLOSE" buttons on the unit down simultaneously, switch the Power on. (2) When " >|| " mark was indicated on the FL Display, press the numeral buttons "3", "2", "6" and "5" on the Remote Control. (3) The following Versions appear every time the "MENU" button on the Remote Control is pressed 4 times. Confirm the following versions "IP 070518" on FL Display. Caution during the rewriting operation: Do not turn the Power of the unit off during the rewriting operation. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Version Up tool setup 1. Download the "SiOptix_Developer_ToolKit.zip" file and "DTK_Install_GUD_1.004.pdf" file to your PC. 2. Click the "setup.exe" file. (Instructions will be provided in DTK install shield GUI) 3. Open the "Router Manager" for comport setting. (Starts > All Programs > Silicon Optix > Developers ToolKit > Router Manager) () (i) Select "Boards In System" tab Click "add Board..." button OST-F1177 Page 3/17 Z07-005 (ii) Choose "Connection type": COM (iii)select radio button "Specify Connection ID with `Anonymous Board Name" (iv) set "Connect ID": COM:1 (if the user connect the 3930 DVD player to PC through COM2 or COM3, then set Connect ID to COM:2 or COM:3 (v) then click 'Test Connection' button (vi) After "Con