File information: | |
File name: | Ñõåìà SYS-57HT Ver. 3.PDF [preview Ñõåìà SYS-57HT Ver. 3] |
Size: | 2238 kB |
Extension: | |
Mfg: | DENON |
Model: | Ñõåìà SYS-57HT Ver. 3 🔎 |
Original: | Ñõåìà SYS-57HT Ver. 3 🔎 |
Descr: | DENON Speaker System Pack Speaker System Pack Denon - SYS-57HT Ñõåìà SYS-57HT Ver. 3.PDF |
Group: | Electronics > Other |
Uploaded: | 23-02-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name Ñõåìà SYS-57HT Ver. 3.PDF Ver. 3 Please refer to the MODIFICATION NOTICE. SERVICE MANUAL MODEL JP E3 E2 EK E2A E1C E1K EUT SYS-57HT s SPEAKER SYSTEM PACK For purposes of improvement, specifications and design are subject to change without notice. Please use this service manual with referring to the operating instructions without fail. Some illustrations using in this service manual are slightly different from the actual set. e Denon Brand Company, D&M Holdings lnc. X0284 V.03 DE/CDM 0809 SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the unit is defective. CAUTION Please heed the points listed below during servicing and inspection. Heed the cautions! Inspect for safety after servicing! Spots requiring particular attention when servicing, such Check that all screws, parts and wires removed or discon- as the cabinet, parts, chassis, etc., have cautions indicated nected for servicing have been put back in their original po- on labels or seals. Be sure to heed these cautions and the sitions, inspect that no parts around the area that has been cautions indicated in the handling instructions. serviced have been negatively affected, conduct an insu- lation check on the external metal connectors and between Caution concerning electric shock! the blades of the power plug, and otherwise check that safety is ensured. (1) An AC voltage is impressed on this set, so touching in- ternal metal parts when the set is energized could (Insulation check procedure) cause electric shock. Take care to avoid electric shock, Unplug the power cord from the power outlet, disconnect by for example using an isolating transformer and |
Date | User | Rating | Comment |