File information: | |
File name: | KOG-371G0S & 371H0S & 391G0S & 391H0S v1.pdf [preview KOG-371G0S & 371H0S & 391G0S & 391H0S v1] |
Size: | 1417 kB |
Extension: | |
Mfg: | Daewoo |
Model: | KOG-371G0S & 371H0S & 391G0S & 391H0S v1 🔎 |
Original: | KOG-371G0S & 371H0S & 391G0S & 391H0S v1 🔎 |
Descr: | Daewoo KOG KOG-371G0S & 371H0S & 391G0S & 391H0S KOG-371G0S & 371H0S & 391G0S & 391H0S v1.pdf |
Group: | Electronics > Other |
Uploaded: | 24-02-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name KOG-371G0S & 371H0S & 391G0S & 391H0S v1.pdf S/M No. : G371G0S001 Service Manual Microwave Oven Model: KOG-371G0S KOG-371H0S KOG-391G0S KOG-391H0S DAEWOO ELECTRONICS CO., LTD. PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not operate or allow the oven to be operated w ith the door open. (b) M ake the following safety checks on all ovens to be serviced before activating the m agnetron or other m icrowave source, and m ake repairs as necessary: (1) Interlock operation, (2) Proper door closing, (3) Seal and sealing surfaces (arcing, wear, and other dam age), (4) Dam age to or loosening of hinges and latches, (5) Evidence of dropping or abuse. (c) Before turning on power to the m icrow ave oven for any service test or inspection within the m icrowave generating com partm ents, check the m agnetron, wave guide or transm ission line, and cavity for proper alignm ent, integrity, and connections. (d) Any defective or m isadjusted com ponents in the interlock, m onitor, door seal, and m icrowave generation and transm ission system s shall be repaired, replaced, or adjusted by procedures described in this m anual before the oven is released to the owner. (e) A m icrowave leakage check to verify com pliance with the Federal perform ance standard should be perform ed on each oven prior to release to the owner. SAFETY AND PRECAUTIONS ... 2 1. FOR SAFE OPERATION ... 2 2. FOR SAFE SERVICE PROCEDURES ... 2 SPECIFICATIONS ... 3 EXTERNAL VIEW... 4 1. OUTER DIMENSION... 4 2. FEATURE DIAGRAM ... 5 3. CONTROL PANEL ... 6 INSTALLATION ... 8 OPERATIONS AND FUNCTIONS... 9 DISASSEMBLY AND ASSEMBLY... |
Date | User | Rating | Comment |