NOKIA NSM3-020 free download

File name NSM3-020.PDF

CONFIDENTIAL 1 (2) Nokia Mobile Phones Service Bulletin No. SB-020/17.03.00 Technical Support, Europe & Africa NSM-3 NEW SERVICE SOFTWARE VERSION 3.01 New service software version 3.01 has been released for NSE-1/3, NSK-1/3, NSB-1/3/6, NSM-1/2/3, NSE-6 products. Note: You cannot use DLL version 3.01 before WinTesla version 6.10 or later is installed. This release of the WinTesla DLL is Y2K compliant. Changes made from version 2.71 to version 3.01: - If "ADC Readings" dialog is opened, the phone will always be set to the local mode - Improvement to "Speed dial restoring" - Improvement to "SCM Edit" - Improvement to PPM file reading - RSSI tuning values are also read from the phone when the band is changed and the phone is already in Local mode. Tuning values are also read when the Product/Initialise/Local Mode is selected - Flash dialog does not disappear behind the other windows during flashing (only Windows 3.11) - EEPROM Component test is disabled during Self-Test with NSM-2/3 CODE DESCRIPTION 0774080 SERVICE SW NSE/K/B-1/3, NSM-1/2/3, NSE-6 3.5'' DISK NSM-3 SB-020 CONFIDENTIAL 2 (2) APPENDIX I FPS-4 Device list update: DEV_A111.EXE (self-extracting file, code 0774228) contains flash device list. Copy FPS-4 Flash Prommer SW release v 2.22 and Flash Device support package v 1.11 to "C:\temp" directory on your PC hard disk and follow the instructions below: - Start your computer in DOS-mode - Go to "C:\temp" directory where you have copied fps4_222.exe - Type "fps4_222" to run fps4_222.exe and extract FPS-4 files - Type "setup C:\flash" to run FPS-4 SW update - Answer questions according to your HW connections - Wait for the prommer SW files to be updated - Copy dev_a111.exe from "C:\temp" to "C:\flash\device" -directory - Go to "C:\flash\device" -directory - Type "dev_a111" to run dev_a111.exe - Answer "YES" to all questions to overwrite old files - Go to directory where you have the FPS-4 SW files (C:\flash) - Type "setup" to run FPS-4 SW setup once more - After setup has finished, restart your computer FPS-4 memory configuration: Product Min RAM Recommended Min Flash Recommended RAM Fl