SAMSUNG ps42p3sx free download

File name ps42p3sx_ch._d58a.pdf

PLASMA DISPLAY TV Chassis : Model : D58A(P) PS42P3SX/XEC PLASMA DIAPLAY TV CONTENTS 1. Alignment and Adjustments 2. Exploded View and Parts List 3. Electric Parts List 4. Schematic Diagrams ELECTRONICS © Samsung Electronics Co., Ltd. Jan. 2003 Printed in Korea AA82-00324A Alignment and Adjustments 1. Alignment and Adjustments 1-1 The Fourth Review of PS-42P3S PAL White Balance on Europe-Bound dels 1-1-1 W/B to be adjusted in 3 modes: DVI, PC, Video (CVBS) Micom will be set to store additional W/B related data in each mode in accordance with the memory mode of the following block diagrams during the W/B adjustment. VSP9437 RF VIDEO Scart1, 2 V-PEAKING Scaler RGB/YUV CONTRAST BRIGHT FLI2300 Y-Delay C-Delay Brightness Contrast Saturation ASI500 Vport SNI Logic AD9883 Adjustment Reg Y/R-gain Cr/B-gain Cb/G-gain RGB RGB-cont RGB-bri R-gamma G-gamma B-gamma Adjustment Reg Bri-offset Con-offset Adjustment Reg R-dri G-dri B-dri R-cutoff G-cutoff B-cutoff TTX-mode SW IC Y/R-offset Cr/b-offset Cb/G-offset Memory Mode Memory Mode -. DVI -. PC -. RF Memory Mode -. DVI -. PC -. RF PC (A-RGB) RGB Analog PC - Auto gain value(RGB) TTX Mode Dport DVI (D-RGB) SIL169 Different adjustment values will be applied to DVI, PC and RF mode. Samsung Electronics 1-1 Alignment and Adjustments 1-1-2 Suggested adjustment methods (DVI, PC: MSPG-925LTH [email protected], Video & RF: MSPG-925LTH, PAL-BDGHI 780x576@50Hz) 1-1-2(A) ADJUSTMENT OF DVI WHITE BALANCE 1. Adjust the timing to "MSPG-925LTH [email protected]" and load the Samsung White Balance Pattern. 2. Enter into Factory Mode. Select 6.SNI for brightness control. Adjust the High Light with 01.Contrast Offset, and set to 00. Set Low Light to "Bright offset" 3. To adjust the Color Coordinate select 9. LOGIC. Select 00.R Drive and 02.B Drive to adjust the High Light Color Coordinate. Keep the 01.G-Drive set at the default value. Adjust 03. R Cutoff and 05. B Cutoff to adjust the Low Light Color Coordinate. Keep the 04. G Cutoff set at the default value. 1-1-2(B) ADJUSTMENT OF PC WHITE BALANCE 1. Adjust the timing to "MSPG-925LTH [email protected]" and load the 16Gray ramp pattern. ...Execute [07. Auto Gain] while in Factory Mode 7.AD9883. /The position and pixel clock must be accurately adjusted before making the Analog Auto adjustment.\ 2. Adjust the timing to MSPG-925LTH [email protected], and load the Samsung White Balance Pattern. Select 6.SNI for brightness control. Adjust the High Light with the 01.Contrast offset. And set it to 00. Set the Low Light to "Bright offset" 3. To adjust the Color Coordinate, select 9. LOGIC. Select 00.R Drive and 02.B Drive to adjust the High Light Color Coordinate. Keep the 01.G-Drive set at the default value. Adjust 03. R Cutoff and 05. B Cutoff to adjust the Low Light Color Coordinate. Keep the 04. G Cutoff set at the default value. 1-1-2(C) ADJUSTMENT OF VIDEO (CVBS) & RF WHITE BALANCE 1. Adjust the timing to "MSPG-925LTH [email protected]" and load the Samsung W