Kyocera 2LZ-003 free download

File name 2LZ-003.pdf

Service Bulletin SB Number: SB 2LZ-003 Creation Date: 30/03/2011 Light image density due to the damaged bias pin at the Subject: developing unit FS-1100/1300D/1350DN/1120D/1320D/1370DN, FS-1028MFP/ Model: 1128MFP The boss of the bias pin may be damaged when installing the Developing unit with too much force. As a result the print density may become too light due to the contact failure between the pin and the earth plate at the Developing unit side. Therefore the height of the pin has been reduced with 0.5mm and the bending angle of the earth plate has been changed from R0.3mm to R1.3mm. Parts No. Old Parts New Parts Description Q'TY Interchange- No. No. ability Old New Old New 1 302HS02460 302HS02461 PIN CONTACT BIAS 1 1 O O 2HS02460 2HS02461 Developing unit side Earth plate The bending angle of the earth plate has been changed from R0.3mm to R1.3mm. Mainframe side Earth pin The height of the Earth pin has been reduced by 0.5mm. Classification Entire stock rework In-field modification at next visit In-field modification by case X No modification necessary Field measure No problems are expected. Serial numbers of affected machines Type Serial number FS-1120D Q5Y0X30021 FS-1320D Q630X28885 FS-1370DN Q660X26411 FS-1028MFP QRB0X01017 FS-1128MFP QQX0X10143 The above mentioned changes have been applied to machines produced after the above mentioned serial numbers. KMIS Service Department, Kyocera Mita Europe Page of A349 / SB 2LZ-003