File name SB-2LZ-0007-C138.pdf(Page.1/3)
Service Bulletin Ref. No. 2LZ-0007 (C138)
May 25, 2012
Subject Measures against Support Point Breakage of the HOLDER DU
FS-1120D, FS-1300D, FS-1350DN, FS-1320D, FS-1370DN,
Model FS-1028MFP, FS-1128MFP, FS-1030MFP, FS-1130MFP,
FS-1035MFP, FS-1135MFP
Topic
The COVER DU at the front side needs to be opened when a duplex jam occurs. If the COVER DU is opened more
than necessary while the machine is lifted up, the support point of the HOLDER DU ASSY connected with the
COVER DU may be broken. Therefore, the following change was made. This does not occur with the COVER DU R
at the rear side.
Content of Changes
The shape of the HOLDER DU was changed in order to limit the opening angle and to prevent damage to the
support point.
HOLDER DU ASSY support point
1) Open the COVER DU. is broken. (Shear stress
[Machine rear side]
generated when fully opened)
2) The HOLDER DU ASSY connected with the
COVER DU is opened.
HOLDER DU ASSY: Old New COVER DU (front side)
New: Shape changed at 2 points and
HOLDER DU ASSY: New HOLDER DU ASSY's opening angle
Shape changed (x2) COVER DU R (rear side) limited
Com pati-
Old Part New Part Q'ty bi lity
No. No. No. Description Remarks
Old New Old New
302FM94060 302FM94061 PARTS HOLDER DU ASSY
1 1 1 X O
2FM94060 2FM94061 SP
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
(Page.2/3)
Service Bulletin Ref. No. 2LZ-0007 (C138)
May 25, 2012
KDC's Classification Entire Stock Rework |