Minolta FS231FVE free download

File name FS231FVE.PDF

FrameMaker Ver.5.5E(PC) FS-231 OPTION For 8020/8031 02.08.23 FS-231 SERVICE MANUAL FrameMaker Ver.5.5E(PC) FS-231 OPTION For 8020/8031 02.08.23 Blank page FrameMaker Ver.5.5E(PC) FS-231 OPTION For 8020/8031 02.08.23 Preface Features a. The adoption of the through-type stapler The machine adopts the through-type stapler, which enables the saddle stitch with one sta- pler. b. Three Auto-Staple Functions The machine has three stapling positions (front stapling at a point, rear stapling at a point, center stapling at two points). c. The Saddle Stitch Function (the book-binding) The machine ejects up to ten sheets of paper which are saddle stitched and center folded. d. The Punch Function (an option) With the punch unit, the machine ejects papers punched for the binders (This function is available for papers with 64 - 90 g/m2, but not available for OHP film). T-3 FrameMaker Ver.5.5E(PC) FS-231 OPTION For 8020/8031 02.08.23 Blank page T-4 FrameMaker Ver.5.5E(PC) FS-231 OPTION For 8020/8031 02.08.23 CONTENTS GENERAL 1. SPECIFICATIONS ... G-1 2. ELECTRICAL COMPONENT LAYOUT ... G-3 3. DRIVE SYSTEM ... G-4 SWITCHES ON PCB 1. CONTROL BOARD ... S-1 1-1. Finisher Control Board ... S-1 1-2. SW1/PSW1/PSW2 ... S-2 (1) Adjustment of the Folding Positions ... S-2 (2) Adjustment of the Center Stapling Position ... S-3 1-3. Punch Control Board ... S-4 (1) Adjustment of the Sensor Output ... S-5 (2) Registration of the Number of Punch Holes ... S-6 (3) Procedure after Replacing the EEP-ROM (IC1002) ... S-7 DIS/REASSEMBLY, ADJUSTMENT 1. LIST OF COMPONENTS TO BE PERIODICALLY CHECKED ... D-1 2. STAPLING UNIT (DRIVE SECTION) ... D-2 2-1. Removal of the External Covers and Components ... D-2 (1) Removal of the Exit Tray ...