oki microdry DP5000 sm free download

File name microdry DP5000 sm.rar

Foreword This manual has been designed for trained service personnel and describes how to maintain and repair. This manual is not intended for general users. This manual comprises the following chapters. Chapter 1: Printer Illustration P2- Chapter 2: Decomposition P6- Chapter 3: Assembly P19- Chapter 4: Adjustments, Printing test P37- Chapter 5: Maintenance/Lubrication P47- Chapter 6: Troubleshooting P50- Chapter 7: Component List P53- Chapter 8: Parts Exchange P60- Chapter 9: Software P68- 1/71 Chapter 1: Printer Illustration 2/71 3/71 4/71 1.1 Operation Panel 1) power Switch Printer power 2) ready/insert Switch Self-printing ,Paper intake/eject 3) LED Power : Indicates if power is turned on. This LED also blinks the HEX dump/self printing status. Ready : This LED blinks when the print data is received. Moreover, when an error occurs, LED is turned off. error : Indicates printer is in an error state. Blinking: Alarm Off: Normal 5/71 Chapter 2: Decomposition 2.1 Detaching of Cases 1 2 Remove the screw (M3*L10P) in the place of Lift the point of Rear Cover with tweezers in the arrows 1, 2 and 3. the direction of the arrow .(2 places) 3 4 Lift up and remove the Rear Cover in the Pull right side of U Cover Assy after direction of the arrow. Front Cover is opened in the direction of the arrow 1, and lift up the lower part of U Cover Assy in the direction of the arrow 2. 6/71 5 6 Insert the tweezers in the space between In