Pioneer AVH-P5700DVD s.m.part2 free download

File name AVH-P5700DVD s.m.part2.rar

ORDER NO. CRT3257 DVD MECHANISM MODULE(MS-3V1) CX-3078 This service manual describes the operation of the DVD mechanism modules incorporated in the models listed below. When performing repairs use this manual together with the specific manual for the model under repair. Model No. Service Manual DVD Mechanism Module AVH-P6600DVD/UC CRT3193 CXK6410 DVH-P5650/RC CRT3264 CXK6414 CONTENTS 1. CIRCUIT DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. MECHANISM DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2004 K-ZZU. MAR. 2004 printed in Japan 1 2 3 4 1. CIRCUIT DESCRIPTIONS A 1 Front End Part (MN35103UB, MN35104UB:IC1501) MN35103UB and MN35104UB are 1-chip LSI for DVD-Player. The connection of this LSI to the Driver IC, SDRAM, Flash-ROM, Audio-DAC, etc. can configure the DVD-Player System. This LSI contains Front End (SODC/FE) that performs RF signal /Servo /Decode processings, Back End (AV decoder/BE) that performs the video decode processing such as MPEG1/MPEG2/JPEG and audio decode processing such as DVD-Audio/AC-3/DTS/MP3, and the system controller (Siscon) for controlling the system. Front End part realizes the arithmetic processing of optical head signal and RF signal processing, the digital signal processing for DVD-ROM reproduction that conforms to DVD standards (16-8 Demodulation, Error correction), the digital signal processing for CD-DA/CD-ROM (Error correction), AV decoder transmission, servo control, spindle motor control and seek control. Please take note that, since (FEP) and (SODC) with DVD mecha-module (MS3) of CX-3016 are integrated into one chip at MN35103UB and MN35104UB, the waveforms of servo system on the front end which had B previously appeared at MS3, i.e., the waveforms of FE, TE and AS, cannot be seen anymore. 1.1 Analog Block (MN35103UB, MN35104UB:IC1501) The analog bl