DENON Service Bulletin OST-F1387 free download

File name Service Bulletin OST-F1387.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1387 Date: September 30, 2008 _____________________________________________________________ Model: POA-3012CI Subject: Correction of the Firmware via DPMS (Denon Product Management Server). Countermeasure is applicable only upon claim from the customer. Added Features: 1) Addition of the "Panel Lock mode": Additional AMX commands "SYPANEL LOCK ON", "SYPANEL LOCK OFF" and "SYPANEL LOCK?" 2) Addition of the "Setup Lock mode": a) Addition of the "AMX command". b) "SSLOC ON", "SSLOC OFF" and "SSLOC? Addition of a "Setup Lock mode" at "OPTION SETUP" of web page (Additional Instruction Manual). 3) Change the indicator of "Remote Maintenance". 4) Problem of entering state of protection when "PW000N" of AMX command is operated from Stand-by mode. Solution: We changed/corrected the firmware. METHOD OF UPDATE via DPMS (Denon Product Management Server) Updating the firmware 1) Connect the Ethernet terminal of the unit to the Network line by Ethernet straight cable. (Don't use Ethernet cross cable.) The connection of the network recommends the Ethernet cable not a wireless connection for a certain update. 2) Turn on the power of unit. 3) Push "SETUP" button, and "MENU" on the FL Display is indicated. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. 4) Select "Option Setup" on the FL Display of front panel, and push the "SELECT/ENTER" button on the front panel. 5) Select "Firmware Update" on the FL Display of front panel, and push the "SELECT/ENTER" button on the front panel. 6) Select "Update Start" on the FL Display of front panel, and push the "SELECT/ENTER" button on the front panel. 7) Select "Yes" on the FL Display of front panel, and push the "SELECT/ENTER" button on the front panel. 8) When updating starts, the power indicator lights red. 9) "Updating ***" is shown on the display during updating. 10) Once updating is completed, "Updatingcomplete" is displayed. 11) "Latest firmware" is displayed when the firmware is the latest version. 12) If the display reads as shown below, check the settings and network environment, then update again. Cauti