PENTAX ME free download

File name PENTAX_ME.rar

PRODUCT No.23900 ASAHI PENTAX SERVICE MANUAL ENGLISH 23900 ME Disassembly Procedure 1. Self-timer charge lever assembly (0-A118)--Self-timer screw left-handed (A122) -- 231K-H50 2. Body Covering, left and right (A19, A20) 3. Install self-timer lever assembly (0-A118) temporarily. 4. Bottom cover assembly (A400) -- CSS 1.7 x 2.8 x 3 Connector seat (A23), R button (C117) 5. Winding lever assembly (0-C69) Cover screw (C139) -- 23600K-C135-A (left handed) Winding lever nut (C8) -- 23600K-C134-A2 Cover ring (A321) 6. Shutter dial Shutter dial at AUTO Loosen set screw (A319) -- Shutter dial (A316) Release pin (A313) -- Release button (A317) 7. Rewinding knob R Rewinding knob assembly (0-D6) -- Nut (D15) - Washer (D21) - ASA dial assembly (0-D11-01) 23600k-D4-A2 8. Top cover assembly (A300) - 4 screws - cover frame (A131) 9. Unsolder 12 lead wires and one contact piece Take out lead wires from cord holder Lead wire No. 21 (K100), No. 24 (T100), No. 22 and No. 23 (T100), No. 19 and No. 20 (N4), No. 15, No. 16, No. 17, No. 18 and one Contact piece (A129), No. 26 and No. 27 (0-A21). 10. ASA volume assembly (R100) - Top cover screw (A16) - CNL-d 1.7 x 2.5 11. Hot shoe contact piece (N4) 12. P.C. board retainer (I1) - W14 13. P.C. board retainer plate (N5) - T-CNS 1.7 x 5 14. LED retainer screw - CNL-D 1.4 x 2 - W31 15. P.C. board assembly (T100) 16. Front board and mirror housing Cocking the shutter Removing 5 screws - W14 Shutter light seal cover (A8) 17. Bulb actuator plate (A504) - CNL-D 1.4 x 2 18. Cocked indicator assembly (0-C23) SW actuator lever shaft (C49) 23900 Page 1 of 15 19. Counter dial Back cover open Counter dial spring (C57) - Counter retainer plate (C25), Counter dial assembly (0-C34) Come off transporting claw spring (C65) Remove (C146) (C53) and CNS 1.7 x 3 Winding seat assembly (0-C2) - (0-C5) - (C7) 20. Shutter block (S000) - CNL-D 1.7 x 3 x 3 21. Bottom release assembly (0-C147) Winding up little from bottom part with tool (23900K-C207-A) To remove retainer screws of (0-C147). 22. Release plate assembly (A500) Guide screw (A507) - Release plate restitution spring (A510). When removing (A500), detach hook lever (C108) from (A500) 23. Shutter charge lever assembly (0-C129) Loosening joint (C207) with tool (23900K-C207-A), remove (0-C129) and (C144). Fasten joint (C207) again. 24. Winding guide plate assembly (0-C102) 25. R lever assembly (0-C105) LW-13 - (0-C105) - (C126) (C145) - LW13 - (C144) - (C107) - (C130) - W14 - (C108) - W8 - (C125) (