DENON Service Bulletin OST-F1121-1 free download

File name Service Bulletin OST-F1121-1.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1121-1 Date: April 3, 2007 _____________________________________________________________ Model: DVD-3930CI, DVD-3930 Subject: Firmware update. Symptoms: (1) Sound interrupts between tracks when specified "DVD-AUDIO- DISC". (2) When unit is powered OFF and ON and "setting of HDMI" is set to other than "HDMI OFF", setting of "DNR" is initialized to "0". (Even if the OSD shows "+3" etc. DNR is in fact set to "0".) (3) If the user changes for M1 ... M5 in the picture adjust menu the NOISE REDUCTION (+1 ... +3) setting - the player "forgets" this setting when it is switched off. That is - when switching it on again the menu still shows that M1 ... M5 is active and NOISE REDUCTION setting is displayed to be on the adjusted level (+1 ... +3) - but it is NOT (actual noise reduction setting is 0) (4) If the player connected to specified HDMI-equipment (EDID is more than 3 block) during "setting of HDMI" is set to other than "HDMI OFF", audio signal may not output even if the video signal is output. (5) When resolution changes from 480i to 480p or changes from VGA to XGA under following conditions, HDMI connect between DVD-3930(CI) to AV amplifier become "Unlock". Condition: *HDMI setting is set to "MULTI (NORMAL)" or "MULTI (LPCM) ". *The DVD player connects with AV amplifier. *The DVD player plays "96kHz 5.1ch" of DVD-AUDIO. (6) When "96kHz 5.1ch of DVD-AUDIO" is played after playing "96/24(5.1ch) DTS signal of DVD-AUDIO" under following condition, HDMI connect between DVD-3930(CI) to AVR-5805 become "Unlock". Condition: *HDMI setting is set to "MULTI (NORMAL) ". *The player connects with AVR-5805. (7) Analog audio of 5.1ch is not down-mixed and only audio signal of FL/FR is output under the following condition. Condition: *HDMI setting is set to "MULTI ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. (NORMAL)" or "MULTI (LPCM) ". *The player connects with HDMI monitor which has 2ch audio output. (8) When the player is playing an SACD which has more than 100 minutes of total recorded time, "A0" is indicated to "time" on the OSD. (9) When l