File information: | |
File name: | KOG-366T0S.pdf [preview KOG-366T0S] |
Size: | 513 kB |
Extension: | |
Mfg: | Daewoo |
Model: | KOG-366T0S 🔎 KOG366T0S |
Original: | KOG-366T0S 🔎 |
Descr: | Daewoo KOG KOG-366T0S KOG-366T0S.pdf |
Group: | Electronics > Other |
Uploaded: | 02-04-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name KOG-366T0S.pdf DAEWOO ELECTRONICS CO., LTD. 686, AHYEON-DONG MAPO-GU SEOUL, KOREA C.P.O. BOX 8003 SEOUL, KOREA TELEX: DWELEC K28177-8 CABLE: "DAEWOOELEC" FAX: 02) 590-6291 TEL: 02) 360-7114/590-6151~5 http://www.dwe. daewoo.co.kr S/M NO. : PRINTED DATE: JUNE 1998 Service Manual Microwave Oven Model : KOG-366T0S DAEWOO ELECTRONICS CO., LTD. OVERSEAS SERVICE DEPT. PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not operate or allow the oven to be operated with the door opened. (b) Make the following safety checks on all ovens to be serviced before activating the magnetron or other microwave source, and make repairs if necessary: (1) Interlock operation, (2) proper door closing, (3) seal and sealing surfaces (arcing, wear, and other damage), (4) damage to or loosening of hinges and latches, and (5) evidence of dropping or abuse. (c) Before turning on microwave power for any service test or inspection within the microwave generating compartments, check the magnetron, wave guide or transmission line, and cavity for proper alignment, integrity, and connections. (d) Any defective or misadjusted components in the interlock, monitor, door seal and microwave generation and transmission systems shall be repaired, replaced, or adjusted by procedures described in this manual before the oven is released to the owner. (e) A microwave leakage check to verify compliance with the federal performance standard should be performed on each oven prior to release to the owner. TABLE OF CONTENTS PROPER USE AND SERVICE PRECAUTIONS...2 SPECIFICATIONS...3 FEATURES DIAGRAM ...4 EARTHING INSTRUCTIONS...5 INSTALLATION ...5 OPERATION PROCEDURE ...6 CONTROLS...7 INTERLOCK MECHINISM FUNCTIONS |
Date | User | Rating | Comment |