Kyocera sb-2lv-0017-d143 free download

File name sb-2lv-0017-d143.pdf

(Page.1/3) Service Bulletin Ref. No. 2LV-0017 (D143) July 12, 2013 Subject Firmware Upgrade (MAIN: Ver.009.010, etc.) FS-2100D(N)_FS-4x00DN_v.09.06.0010_(2013-07-10) Model FS-2100D, FS-2100DN, FS-4100DN, FS-4200DN, FS-4300DN KDC's Classification Entire Stock Rework In-Field modification at next visit In-Field modification by case No modification necessary Field Measure: Please upgrade the firmware to the new version when the phenomenon described below arises or if necessary. Serial Nos. of the Affected Machines: From the July 2013* production (Plan) * The above is the plan at the present moment. Please note that this information is subject to change. Topic The firmware was upgraded as follows. Content of Changes No. Item Details CTL FW 1 AirPrint (VER1.2.1) The following change was made to support AirPrint (VER1.2.1) for the MAIN support Apple products such as iPad and iPhone. *1 Default value: ON (The value will be set to ON by upgrading the firmware on the field machines. However, it may become OFF depending on the machine settings. For more details, please refer to the Page 3.) 2 Support of the auto The auto cassette change switch was newly implemented. (Auto MAIN LANG cassette changes cassette change itself has been supported since the first mass switch production. This time, the switch was implemented.) *1 Print Setting > Auto Cassette [ON/OFF] Default: ON 3 Change to the toner If the toner installation mode is executed with the main charger roller 817691 ENGINE 815758 005.003 installation mode incompletely installed, the main charge condition is not correctly recognized and toner supply is continued, which might cause contamination inside of the machine and failure detection of waste toner full. Therefore, the following changes were made.