Unitc RE8 SM free download

File name RE8_SM.PDF

DISPLAY EDITOR (Machine Code: A997) 28 December 1993 SPECIFICATIONS 1. SPECIFICATIONS Original Size: Maximum: A3 (lengthwise) or 11" x 17" (lengthwise) (Scanned through the copier.) Display: LCD (Monochrome), 8 gradations 640 x 480 dots Zoom In/Out: 100% (33 dpi), 150% (50 dpi), 200% (67 dpi), 300% (100 dpi) Display Speed: Less than 2 seconds Editing: Screen and cursor Power Consumption: 19.5W Power Source: 5V/less than 1.5A and 24V/less than 10.5 from the copier. Dimensions (W x D x H): 280 x 232 x 50 mm 11.0" x 9.14" x 1.97" Weight: less than 1.5 Kg or 33.1 lb Remarks: The holder is required for installation. Display Editor 1 OVERVIEW 28 December 1993 2. OVERVIEW [B] [A] [K] [M] [C] [D] [E] [F] [G] [H] [I] [J] [L] The scanned image is sent to the display editor and displayed on the LCD (640 x 480 dot). By using the cursor [A], it is able to designate an area of the original image. The display [B] shows 8 levels of grayscale, and the data communication between the display editor and the IPU board is done by 3 bit parallel signal. 2 28 December 1993 EXPLANATION FOR EACH KEY 3. EXPLANATION FOR EACH KEY Key Function Scan Key [C] Sends the scan start command to the copier, and scanning of the original is performed. After the scanning, the entire original image is shown on the display editor (100%). Full Image Key [D] The data scanned with 100 dpi is changed to about 33 dpi. The entire A3 or DLT original image can be displayed. Zoom 1 Key [E] The data scanned with 100 dpi is changed to 50 dpi. (150% enlargement) Zoom 2 Key [F] The data scanned with 100 dpi is changed to about 67 dpi. (200% enlargement) Zoom 3 Key [G] The data scanned with 100 dpi is displayed with about 100 dpi. (300% enlargement) Image Shift Key [H] Press to shift the image up and down, left and right by using the cursor key according to the block diagram displayed at the lower left corner. Cursor Key [I]