DENON Service Bulletin OST-F1520 free download

File name Service Bulletin OST-F1520.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1520 Date: June 22, 2009 _____________________________________________________________ Model: DVD-1800BD Subject: Correction of the Firmware. Countermeasure is applicable only upon claim from the customer. Symptom: 1) Blu-ray movie "An American Carol" freezes after previews play. 2) We have to add two more BD's: "Babylon A.D." and "Lionel Richie, Live; His Greatest Hits and More". The trailer/promo in the beginning of both discs plays correctly, but the Main Movie will not play at all. 3) It takes about two minutes until the JAVA of the Blu-ray disc "GHOST IN THE SHELL 2" reading is completed. 4) The picture and sound stop temporarily at "0:05:34" when "Cinema navigation" of Blu-ray disc "WALLE" is reproduced. 5) When Blu-ray disc "Bedtime Stories" is played the previews will play and then the "Power ON" or "Loading" appears on the display and the previews begin again. Solution: We corrected the firmware so that no malfunction occurs. MODIFICATION: Please burn each firmware on a blank CD-R separately, and update the unit upon repair of the unit. * Program Files to be supplied: FE/BE Firmware: Version after the update: 1.120 ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Note: Upon recording the Disc: a) When recording the supplied file on the blank CD-R, the format shall be "ISO9660" and the session shall be "CLOSE". b) When recording the supplied file on the disc, please use the lowest recording speed that is available on your PC. If the file is recorded at a higher speed, the rewriting operation may fail due to improperly recorded data on the disc. FE/BE Firmware: 1) Rewriting procedures of the "FE/BE" ROMs. (1) Turn the Power Supply of the unit on. Press the "OPEN/CLOSE" button and open the Disc Tray. (2) Put the recorded CD-R on the Disc Tray and press the buttons on the remote control in the order of "9", "8", "7", "6" and "POP UP MENU/MENU". (3) The Disc Tray closes, the FL Display indicates "F/W-UP" and the update of the firmware starts automatically. (4) After indicating the "Ver: 1.120" on the FL Display, the Disc Tray ope