AIWA CT-FR531M free download

File name CTFR 531 Rev.pdf

CT-FX531M CT-FR531M YV(ST) YZ(ST) SERVICE MANUAL STEREO CAR CASSETTE RECEIVER BASIC TAPE MECHANISM : CDS-801AW1 S/M Code No. 09-012-354-4N2 DA TA SPECIFICATIONS RADIO SECTION (FM) Frequency Range: Usable Sensitivity: 50 dB Quieting Sensitivity: IF Rejection: Frequency Response: S/N Ratio: Stereo Separation: Alternate Channel Selectivity: Capture Ratio: 65 MHz­74 MHz (50-kHz steps) * 87.5 MHz­108 MHz (50-kHz steps) * 12.7 dBf 17.2 dBf 80 dB 30 Hz-15,000 Hz 63 dB 35 dB at 1 kHz 70 dB 3 dB RADIO SECTION (FM) Frequency Range: Usable Sensitivity: 50 dB Quieting Sensitivity: IF Rejection: Frequency Response: S/N Ratio: Stereo Separation: Alternate Channel Selectivity: Capture Ratio: 87.5 MHz­108 MHz (50-kHz steps) 12.7 dBf 17.2 dBf 80 dB 30 Hz­15,000 Hz 63 dB 35 dB at 1 kHz 70 dB 3 dB (MW) Frequency Range: Usable Sensitivity: 531 kHz­1,602 kHz (9-kHz steps) 30 µV (30 dB) (MW) Frequency Range: Usable Sensitivity: 531 kHz­1,602 kHz (9-kHz steps) * or 530 kHz­1,710 kHz (10-kHz steps) * 30 µV (30 dB) (LW) Frequency Range: steps) Usable Sensitivity: 144 kHz­288 kHz (1-kHz/9-kHz 30 µV (30 dB) (LW) Frequency Range: Usable Sensitivity: 144 kHz­288 kHz (1-kHz/9-kHz steps) 30 µV (30 dB) TAPE SECTION Tape Speed: S/N Ratio: Frequency Response: Stereo Separation: 4.8 cm/sec. (17/8 ips) 50 dB 40 Hz­14,000 Hz 40 dB 9k 10 k * Set the frequency increment for your area using the switch on the bottom of the unit. (The switch is factory-set to the 9 k position) AUDIO SECTION TAPE SECTION Tape Speed: S/N Ratio: Frequency Response: Stereo Separation: 4.8 cm/sec. (17/8 ips) 50 dB 40 Hz­14,000 Hz 40 dB Max. Power Output: 45 W x 4 channels AUX IN input Input sensitivity (load impedance) AUX IN: 300 mV (10 k) AUDIO SECTION Max. Power Output: 45 W x 4 channels GENERAL 14.4 V (11 to 16 V allowable), DC, negative ground Load Impedance: 4 Tone Control: Bass ± 10 dB at 100 Hz Treble ± 10 dB at 10 kHz Preamp Output Voltage (load impedance): 2.2 V (10 k) Installation size: 182(W) x 53(H) x 155(D) mm (71/4(W) x 21/8(H) x 61/8(D) inches) Power-Supply Voltage: AUX IN input Input sensitivity (load impedance) AUX IN: 300 mV (10 k) GENERAL Power-Supply Voltage: 14.4 V (11 to 16 V allowable), DC, negative ground Load Impedance: 4 Tone Control: Bass ± 10 dB at 100 Hz Treble ± 10 dB at 10 kHz Preamp Output Voltage (load impedance): 2.2 V (10 k) Installation size: 182(W) x 53(H) x 155(D) mm (71/4(W) x 21/8(H) x 61/8(D) inches) STEERING-WHEEL-MOUNTED REMOTE CONTROL UNIT Dimensions: approx. 67 (W) x 26 (H) x 27 (D) mm (23/4 (W) x 11/16 (H) x 11/8 (D) inches) (excluding holder) approx. 38 g (1.33 oz) (including holder, battery) Weight: STEERING-WHEEL-MOUNTED REMOTE CONTROL UNIT Dimensions: approx. 67 (W) x 26 (H) x 27 (D) mm (23/4 (W) x 11/16 (H) x 11/8 (D) inches) (excluding holder) approx. 38 g (1.33 oz) (including holder, battery) · Design and specifications are subject to change without notice. Weight: -2- ACCESSORIES LIST REF. NO 1 1 2