Fujitsu MPG Recovery Tool Manual free download

File name Fujitsu MPG Recovery Tool Manual.PDF

February 7, 2002 ============================================================================ Fujitsu MPG series HDD Recovery Tool Manual Version 2.02A Copyright (c) 2002 Fujitsu Limited. All Right Reserved. ============================================================================ This document explains the recovery method and usage of the Recovery Tool for FUJITSU MPG Series Hard Disk Drives. Purpose of this Recovery Tool The purpose of this tool is to recover customer's critical data from failing Fujitsu MPG series HDD if requested by the customer. However, the data of the failure drives may NOT be 100% recovered. For limitations of this Recovery Tool, please see the Section 3 of this document. After data recovery, the drive must be replaced with a good drive. Please do not use the recovered drive even if the drive works fine because the drive is fixed temporally for data recovery. Licensing agreement conditions Before use this Recovery Tool you must agree the following licensing agreement conditions. If you do not agree to the terms of this agreement, you are not authorized to use this Recovery Tool in any way. 1) This tool does not recover 100% due to the drive failure condition. 2) Do not change or delete the copyright displays included in this tool. 3) Do not change any contents included in this tool. 4) Do not use any contents included in this tool for sales purpose. 5) Do not distribute this tool without the permission of Fujitsu Ltd. 6) Do not assume any liability based on this tool. 7) Use this tool under the specified condition. 8) Use this tool for exclusive purpose of recovering data from Fujitsu MPG series Hard disk drives. 9) Use of this tool is prohibited without the above-mentioned agreements << items 1) - 8) >> ------------------------------------------------------------------------------------------------------------------------------------- Table of contents 1. Introduction 2. System configuration required 3. Drive condition to be recovered by this tool 4. Create the Recovery Tool on floppy disk 5. Run the Recovery Tool 6. Method of Using Copy Tool 7. Notification 8. Revision History 1/11 Fujitsu Proprietary & Confidential 1. Introduction This Recovery Tool is workable for all Fujitsu MPG series HDD drives. FUJITSU MPG3204AH-E/MPG3409AH-E/MPG3307AH-E FUJITSU MPG3102AH/MPG3153AH/MPG3204AH FUJITSU MPG3102AT/MPG3204AT/MPG3307AT/MPG3409AT 2. System configuration required - Microsoft (R) MS-DOS(R) 5.0 or later system with Monitor and Key board - First Boot Device is Floppy drive - When you make the Recovery Tool floppy disk, the following system configuration is required.