Kyocera 2J0-014 free download

File name 2J0-014.pdf

Service Bulletin SB Number: SB 2J0-014 Creation Date: 26/07/2011 Firmware upgrade (FS-2020D/3920DN/4020DN v005.001/ Subject: v007.001 and FS-6970DN v006.002) Model: FS-2020D/3920DN/4020DN/6970DN Item Contents 1 Grey background on Phenomenon the print-out. When the toner level is low, the message "Replace toner" or "Low toner" appears. After refilling the toner, grey background may appear on the print-out. Solution The amount of refilled toner has been changed. Please note that the message "Replace toner" has been discontinued. 2 Error code SC6000 Phenomenon (FS-6970DN only) Error code SC6000 (Fuser heater error) may occur. Cause The fuser heater may not reach the correct temperature on time. Solution Therefore the timing to indicate the above mentioned message, has been changed from 5 seconds to 15 seconds. Firmware for the FS-2020D/3920DN/4020DN Type Program No. Check SUM Version Status Date Applicable model(s) SYSTEM 2J0_3000007016 d290 007.016 20/12/2010 FS-2020D/3920DN/ 4020DN ENGINE 2J0_1000005001 EAE0 005.001 08/06/2011 FS-2020D ENGINE 2J1_1000005001 5177 005.001 08/06/2011 FS-3920DN ENGINE 2J2_1000007001 F44E 007.001 08/06/2011 FS-4020DN Firmware for the FS-6970DN Type Program No. Check SUM Version Status Date Applicable model(s) SYSTEM 2J5_3000004003 68fa 004.003 24/12/2010 FS-6970DN ENGINE 2J5_1000006002 8B90 006.002 08/06/2011 FS-6970DN Classification Entire stock rework X In-field modification by case No modification necessary In-field modification at next visit Field measure When the above mentioned phenomena occur, please upgrade the firmware to the latest version. Serial numbers of affected machines Type Serial number FS-2020D/3920DN/4020DN/6970DN June 2011 production. The above mentioned changes have been applied to machines produced after the above mentioned production dat