DENON Service Bulletin DZ09-366 free download

File name Service Bulletin DZ09-366.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : DZ09-366 Date: April 23, 2010 _____________________________________________________________ Model: AVR-4810CI Subject: Correction of the Firmware via DPMS (D&M Product Management Server). Countermeasure is applicable only upon claim from the customer. Symptom: 1) Crackling noise on surround back speakers during playback of DTS-HD-MSTR 6.1 disc. 2) The unit can not off the "Audio MUTE" depending on a timing of "MUTE demand signal "from HDMI Receiver. 3) "HDMI input" does not works when connect a Sky box by Thompson HD. 3-1) problems (no sound) with the new firmware update (DZ09-213) 3-2) HDMI-interoperability issue with Humax Foxstat DVR. 3-3) HDMI-interoperability issue with HUMAX Foxsat STB 3-4) loss of audio output from the 2310 4) Radio station name is not displayed when play the station by choose the preset after registered the Intermet radio station. 5) The sound of HD audio part is not output by combining BD-C6900 (by Samsung) and AVR-3310. Solution: We corrected the firmware so that no malfunction occurs. Updating the firmware (Refer to the Instruction Manual.) 1) Turn the Power Supply of the unit off. 2) Connect the Ethernet terminal of the unit to the Network line by Ethernet straight cable. (Don't use Ethernet cross cable.) 3) The connection of the network recommends the Ethernet cable for certain update. 4) Turn the Power Supply of the unit on. 5) The unit sets the Internet. Wait for about two minutes until customer's router ends the set up. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Caution: The update doesn't succeed when the customer's set cannot connect to the Internet correctly. In this case, please confirm the internet environment in the customer's house. Whether the set is able to receive Internet radio correctly or not can be used to determine whether the Internet is properly connected. There are some problems under the internet environment when the Internet radio can not be received. 6) Press "MENU" button on the front panel and indicates the GUI menu. 7) Press "CURSOR" button. 8) The GUI indicates, "MANUAL SET