DENON Service Bulletin OST-F1427 free download

File name Service Bulletin OST-F1427.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1427 Date: October 24, 2008 _____________________________________________________________ Model: AVR-2809CI, AVR-989 Subject: Supply of Setup Tool Symptom: Because the AVR-2809CI/989/ is not equipped with the Ethernet terminal it cannot be set up externally by means of a PC using the web. The supplied Software has been designed so that the AV Amplifier can easily be set up via the PC's Display by connecting the AV Amplifier to the PC by means of RS-232C Cable available in the market. Note: Please pay attention upon handling since this Tool has been designed on the assumption that the installer has the knowledge to operate it. It is not a general user tool and do not give this to the customer or end user. Solution: SETUP TOOL TO BE SUPPLIED: 1) Program File to be used to install the "AVR-2809CI/989" onto a PC: For Windows Vista: AVR2809_SystemSetup_0.0.12 (for Vista).exe For Windows XP: AVR2809_SystemSetup_0.0.12(for XP).exe When this Program File is executed onto a PC, the above "AVR-2809CI/989 Setup Tool" can be automatically installed on the PC. 2) Operating Manual for the "AVR-2809CI/989 Setup Tool": AVR2809_setup_tool_0.0.12_manual.pdf 3) Update the firmware of unit on the "AVR-2809CI/989 Setup Tool". Refer to the Operating Manual for Setup Tool. AVR2809_setup_tool_0.0.12_manual.pdf ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Confirmation of the Version after the updating: After completion of the updating operation, the new version number can be confirmed by starting up the AVR-2809CI/989 according to the following procedure. With the following operation, the AVR-2809CI/989 can be set to the Flash-ROM Version-Number Confirmation Mode. Turn the power of the AVR-2809CI/989 on, while holding both "STATUS" button and "RETURN" button on the front panel simultaneously. Every time the "STATUS" Button is pressed, version numbers of the MAIN, SUB, etc. are indicated on the front panel section in the following order. Serial Number Range: Applicable range (Last 5-digits) AVR-2809CI 00001 ~ 11240 AV