DENON Setup Tool (0.1.08) AVR-2807 free download

File name Setup Tool (0.1.08) AVR-2807.PDF

AVR-2807 Setup Tool (0.1.08) Manual DENON Apr.20.2006 1/7 Table of contents 1 Instruction Manual 1.1 Stand alone mode 1.2 Communication mode 1.2.1 Top Menu & System Setup 1.2.2 Surround Parameter 1.2.3 Load/Save Full Setup 1) Minimum hardware and software requirements: Type PC/AT compatible CPU Intel Pentium/Celeron500MHz or faster RAM 128MB or more Free hard disc space 25MB or more OS Windows XP Home Edition / Professional SP2 or more Display resolution Super VGA (800x600) or more. Port. RS-232C Communication speed 115,200bps 2) Installation procedure a. Execute AVR-2807SetupTool.exe.(Install the AVR-2807 Setup Tool and necessary files) b. Execute AVR-2807 Setup Tool. Ex. [Start] of Windows - [Program] - [AVR-2807 Setup Tool] 2/7 1 Instruction 1.1 Stand alone mode This mode enables the setting data concerning the product to be made with PC beforehand. (1) Select "Stand alone" by the connection port setting. (2) Select "Model name" by the Model setting. (3) Select [System Setup] menu and set parameters. (1) (2) Load Param. Button : The setup parameter can be loaded from the file in PC. Save Param. Button : Edited setup parameter can be saved to the file. [ETC Setup]-[Surrond Parameter] : The surround mode and the parameter can be set to each input function.(see page6) Hidden Setup Menu : When this item is checked,system setup can not operate. Protect Auto Setup Parameter : When this item checked,auto setup parameter is protected. NOTE *[Real Time Control] cannot be used. *[Load/Save Full Setup] of [ETC Setup] cannot be used. *Channel level setting of [Speaker Setup (2)] and [Surrond Parameter] may be over write the results of Autosetup. 3/7 1.2 Communication mode 1.2.1 Top Menu & System Setup This mode enables the control of the product from the PC via RC-232C cable. (1) Select "COM 1-4" by the connection port setting. (2) "Model name" is set automatically. Get the all Setting Data from AVR-2807 and copy to the Edit Data Button : All setup parameter of [System Setup] can be loaded from the AVR2807 connected via RC-232C, and then those parametrs copy to the edit data. Send the all Setting Data to AVR-2807 Button : All edited setup parameter of [System Setup] can be set to the AVR2807 connected via RC-232C. NOTE *Until getting the setting data from the AVR-2807, Channel level setting of [Speaker Setup (2)] overwrite the result