LG 134A-3 free download

File name 134A-3.pdf

DESCRIPTION OF MICOM 1. Feature of MICOM Function 1-1. Signal Selection (1) Input signal selection : RGB1(Analog)/RGB2(Analog)/RGB3(Analog/Digital)/Video/S-Video/Component (2) A/V color standard automatic signal selection : NTSC/PAL/SECAM/NTSC 4.43/PAL M/PAL N/PAL 60 -> Automatic system detection (3) Specification of PC input signal : Refer to "PC Input Specification Table". (4) Specification of Component input signal : 480I,480P,DVD 625Line,576P,720P,1080I 50Hz,1080I 60Hz 1-2. Video Interpolation Extension, Compression Support You can control the correspondent IC like scaler after discrimination of input signal. If the resolution is lower than XGA, you can extend it to the XGA scale. Or if it is higher than XGA, you can compress it to XGA scale. * Resolution : Set the resolution lower than 1280x720 in order to adjust the picture of panel (resolution:1280x720) to the screen. 1-3. Judging No Signal OSD,SOUND Mute 1-4. Video Signal Adjustment (1) Analog RGB(PC) input : Contrast, Brightness, Color(R, G, B) Clock, Phase, H Position, V Position (2) Digital RGB (DVI) input : Contrast, Brightness, Colorr(R, G, B) Clock, Phase, etc. are automatically adjusted on auto tracking mode, but noise can be included in the signal owing to the IC specification and also they can't be adjusted precisely according to the signal pattern. So the manual to adjust Clock, phase, etc. manually. 1-5. Sound Signal Adjustment Volume, Mute,DASP,AVL,MIC 1-6. Other Functions Item REF ARC(Aspect Ratio Control) Analog/Digital RGB :4:3,16:9 mode Toggle funtion Video/S-Video/Component :4:3,16:9 ,zoom 1,zoom 2,zoom 3 mode Toggle funtion ZOOM Adjusting the magnification of zoom by shortened key.(+/- 25 level) Checking Lamp Time Checks used time to now and displayes the fact when replacing time gets. OSD Language Selection Korean, English, French, German, Italian, Spanish, Chinese,Japanese Auto Tracking Automatically controlling CLOCK, PHASE Set ID Characteristic number of set which is used to adjust the funtions of set with PC by connecting RS-232C terminal(1~99). When the Set ID specified in PC P/G accords with the set ID specified in the set,the funtions of set can be controlled by using the menu of PC P/G. APC(Auto Picture Control) By using this menu,you can select "clear","soft","comfortable" or "off" in Video,S- Video,Component. Audio Input By using this menu,make speaker output by selecting audio input R/L or Mic. And you can use R/L by co