DENON Service Bulletin OST-F1507 free download

File name Service Bulletin OST-F1507.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1507 Date: May 20, 2009 _____________________________________________________________ Model: TU-604CI Subject: Correction of the Firmware via DPMS Countermeasure is applicable only upon claim from the customer. Symptom: Improvement according to function of AVR amplifier. 1) Remote maintenance cannot be turned on by pushing about the button simultaneously. 2) The display of the FL tube of the Access Port setting is wrong. 3) It is not equipped with the installer lock function. (In the WEB control.) 4) When the installer is locked, the unit accepts the Setup. (by button on the unit or Remote control) 5) The setting of Remote Lock can be operated from Menu. 6) There is no remote control code of the remote maintenance beginning and the end. 7) The Panel Lock function can be selected only with the Menu button and on/off of the AC power supply. Correction of the following display at FM, AM, HD Radio and DAB. 1) The STEREO logo lights when the HD Radio is received. 2) The RDS logo lights when DAB is received. 3) When Status of SETUP is confirmed, Information, Channel, and the Frequency are not correct and after the unit is factory initialized. 4) When RDS is not received, the PTY logo is displayed in FL Display. Solution: COUNTERMEASURE: Update the firmware via DPMS (Denon Product Management Server) so that no malfunction occurs. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Updating the firmware 1) Connect the Ethernet terminal of the unit to the Network line by Ethernet straight cable. 2) Turn on the power of the unit. 3) Push the SETUP button on the unit. 4) Select the "Option Setup" function by "SELECT/ENTER" knob, and push the "SELECT/ENTER" knob. 5) Select the "Firmware Update" function by "SELECT/ENTER" knob, and push the "SELECT/ENTER" knob. 6) Select the "Start" function by "SELECT/ENTER" knob, and push the "SELECT/ENTER" knob. 7) Select the "Yes" function by "SELECT/ENTER" knob, and push the "SELECT/ENTER" knob. 8) When updating starts, the power indicator lights red. 9) "Updating ***" is shown on the display during updating. 10) O