Kyocera VI150 C - Errors free download

File name VI150 C - Errors.pdf

190 CONTENTS 3-5 Self Diagnostics 3-5-1 Self-diagnosis ... 3-5-1 (1) Self-diagnostic function ... 3-5-1 Self diagnostic codes ... 3-5-2 1-1-23 190 3-5-1 Self-diagnosis (1) Self-diagnostic function This unit is equipped with a self-diagnostic function. When it detects a problem with itself, it disables copying and displays the problem as a code consisting of "C" followed by a two- digit number, indicating the nature of the problem. A message, "Call for service," is also displayed. After removing the problem, the self-diagnostic function can be reset by opening and closing the front cover to turn safety switch 1 off and on. Call for service. Figure 3-5-1 Service call code display 3-5-1 190 Self diagnostic codes Remarks Code Contents Check procedures/ Causes corrective measures C05 Operation unit PCB com- The connec- Check the connection of con- munication problem tors of the nectors of the wires between There is a communication wires between the main PCB and operation problem between the main the main PCB PCB. PCB and operation unit and operation PCB. unit PCB make poor contact. Defective Replace the main PCB or main PCB or operation unit PCB and operation unit check for correct operation. PCB. C06 Engine PCB communica- The connec- Check the connection of con- tion problem tors of the nectors on the main PCB and There is a communication wires between engine PCB. problem between the main the main PCB PCB and engine PCB. and engine PCB make poor contact. Defective Replace the main PCB or main PCB or engine PCB and check for engine PCB. correct operation