LG NP00EDADJ free download

File name NP00EDADJ.pdf

ADJUSTMENT INSTRUCTION 1. Application Object II. Output Signal Parts Adjustment This instruction is for the application to the LCD Projector. 1. VCOM Adjustment 2. Notes 1-1. Required Test Equipments (1) PC Pattern Generator (MSPG 2165A-MASTER) (1) The power source insulation of this LCD Projector is not (2) 40" screen and set stand charging type and you may not use the transformer for insulation. But you'd better adjust the set after operating it 1-2. Setting of Devices with insulation transformer between power supply cable and input part of the set for protecting the adjusting Adj. Jig equipments. (2) The adjustment must be performed under the correct sequence. Screen Lighting Part (3) The adjustment must be performed in the circumstance of 25!5cC of temperature and 65!10% of relative humidity if there is no specific designation. (4) The input voltage of the receiver must keep 220V, 60Hz in LP-XG22 PC1 PC Pattern adjusting. Generator (5) The set must be operated for 5 minutes preliminarily SET before adjustment if there is no specific designation. The preliminary operation must be performed after Stand receiving 100% White Pattern. But reception of the moving picture may also be possible in unavoidable case. Setting of Devices 1-3. Preparation for Adjustment I. Input Signal Parts Adjustment (1) Connect the PC pattern generator with LP-XG22 set as . 1. AV Input Signal Adjustment (2) Adjust the output of PC pattern generator to source XGA- 60 to output 30% WHite pattern and turn the power on. 1-1. Required Test Equipments (1) A PC pattern generator : 1EA 1-4. Sequence of Adjustment (2) Remote control :1EA (1) Turn the power supply of LP-XG22 on.