Kyocera 2H9-011 free download

File name 2H9-011.pdf

Service Bulletin SB Number: SB 2H9-011_Revised issue Creation Date: 12/01/2012 Subject: Replacing/Re-assembling the Holder DU and Stay DU Model: FS-1028MFP/1128MFP/1030MFP/1130MFP/1035MFP/1135MFP Revision information: Affected models have been added. The Holder DU and Stay DU will no longer be supplied as individual parts since the paper may feed a skewed, when the adjustment is not performed after replacing one of the above mentioned parts individually. Therefore please use the Parts holder DU assy SP (302FM94060), when replacing the Holder DU or Stay DU. Above view of the machine Old condition New condition Pulley MID Stay DU Parts holder du assy SP Holder DU Shaft pulley Parts No. Old Parts New Parts Description Q'TY Interchange- SP No. No. ability Old New Old New 1 ------------ 302FM94060 PARTS HOLDER DU ASSY SP (*1) - 1 - O O 2FM94060 2 2FM21010 ------------ +HOLDER DU - - - - - 5MVX861XB001 3 2FM21020 ------------ +STAY DU - - - - - 5MML821SD009 Part notes: (*1): This Assembly part contains the Holder DU (1 piece), the Stay DU (1 piece), the Shaft pulley_ 302FM02421 (1 piece) and the Pulley MID_2FM02210 (2 pieces) Classification Entire stock rework In-field modification at next visit X No modification necessary In-field modification by case Field measure When replacing the Holder DU and Stay DU, please use the Parts holder DU assy SP (302FM94060). Do not replace the Holder DU and Stay DU individually. Under this condition, a skewed feeding of the paper may occur. KMIS Service Department, Kyocera Mita Europe Page 1 of 1 A324 / SB 2H9-011