IBM Deskstar P7K500 Installation Guide free download

File name Deskstar P7K500 Installation Guide.pdf

Quick installation guide Hitachi Deskstar P7K500 ATA 133 Hard disk drive Models: HDP725050GLAT80 HDP725040GLAT80 HDP725032GLAT80 HDP725025GLAT80 HDP725050GLA380 HDP725050GLA360 HDP725040GLA380 HDP725040GLA360 HDP725032GLA380 HDP725032GLA360 HDP725025GLA380 System requirements for Ultra ATA/133 Quick installation procedure If you do not have the components listed below, your Note: Back up all data before installing drive! drive will function but at speeds lower than 133 MB/s. 1. Turn off the computer. 40-pin, 80-conductor cable 2. Unplug the computer 3. Remove the computer cover as instructed by the A controller card or motherboard chipset with Ultra computer system manual. ATA/133 capability 4. Discharge static electricity (see Handling pre- Ultra ATA/133 compatible BIOS or driver cautions). 5. Note the mounting position of existing drives and cables. If you are replacing a drive or any cable, Handling precautions remove it now. 6. Remove the drive from the ESD bag. Set the drive down gently to prevent damage from 7. Record the model, the part number, and the serial impact or vibration. number of the drive for future reference. Do not open the ESD bag containing the drive until 8. Insert the required jumpers. Refer to the jumper needed. block diagram below. Handle the drive carefully by the edges. Do not