Ericsson Test Installation free download

File name Test Installation.pdf

TEST INSTALLATION INSTRUCTION T18 Approved according to 1776-2/FEA 209 544 STANDARD REPAIR PACKAGE TEST INSTALLATION INSTRUCTION T18 ABSTRACT This document describes the test installation instruction for standard repair package for T18. APPLICATION This document contains information over what software and hardware must be installed. It also describes how to perform the installation and configuration used in the standard service package for T18. CONTENTS 1. GENERAL 2. HARDWARE INSTALLATION 2.1. TEST SET 2.2. ANTENNA CABLE 2.3. COMPUTER 2.4. HARDLOCK 2.5. SERVICE CABLE 3. SOFTWARE INSTALLATION 3.1. EMMA SHELL 1. GENERAL The standard service package is built up with a test set, a computer and interface cables. A hardlock is required for security reasons. 2. HARDWARE All test hardware must be approved by Ericsson and is documented in Equipment List. 2.1 TEST SET A test set approved according to Equipment List must be used. Instructions for test set installation according to instrument manufacturer. The self executing test software and options according to Equipment List must be present. 2.2 ANTENNA CABLE 1/00021-2/FEA 209 544/12.C TEST INSTALLATION INSTRUCTION T18 Connect antenna cable to RF gate and antenna connector. 2.3 COMPUTER IBM compatible computer with Windows 95, Windows 98 or Windows NT. 2.4 HARDLOCK Hardlock with article number KRY 105 165 is required. Connect hardlock to the parallel port. 2.5 SERVICE CABLE Connect service cable to one of the serial ports on the PC and to the system connector according to fig- ure. 3. SOFTWARE No repair shell is required. 3.1. EMMA SHELL 3.1.1. Download Emma shell if not already installed and all T18 software into an empty directory. 3.1.2. Start the downloaded EXE file from Windows RUN option, the software will now self-extract into more files. 3.1.3. Start SETUP.EXE in the temporary directory from Windows RUN option. 3.1.4. There will be on-line instructions during the installation. 3.1.5. The software is installed in the proper shell under the flash directory. 3.1.6. Erase all files in the temporary directory The software is self-instructing and gives on-line instructions if needed. 1/00021-2/FEA 209 544/12.C 2 (4) TEST INSTALLATION INSTRUCTION T18 1/00021-2/FEA 209 544/12.C 3 (4) TEST INSTALLATION INSTRUCTION T18 1/00021-2/FEA 209 544/12.C 4 (4)