Kyocera SB-2K3-0012-B137 free download

File name SB-2K3-0012-B137.pdf

(Page.1/2) Service Bulletin Ref. No. 2K3-0012 (B137) [Service Information] May 20, 2011 Notes on the Replacement of the Main Board (Handling of Subject C0180 Error) FS-6030MFP, FS-6025MFP, FS-6025MFP/B, FS-C8020MFP, Model FS-C8025MFP Topic Since no HDD is equipped on the models listed above, some data is saved on the main board instead. Therefore, the following operations are required when the main board was replaced. 1. Execute the maintenance mode U004 to resolve machine number mismatch which appears after main board was replaced. 2. Adjust the scanner image. 1) Input the value in the auto scanner adjustment chart in the maintenance mode U425. 2) Execute the maintenance mode U411 by applying the auto scanner adjustment chart. 3) Execute [Halftone adjustment] from the system menu. 3. Reactivate the license for the optional product(s) if any installed. 1) Reactivate the ID CARD AUTHENTICATION KIT B). 2) Register the ID card again in the maintenance mode U222. 4. Import data in the maintenance mode U917 if any was exported from the machine before the main board was replaced. (The export and import can be also performed via KM-Net Viewer.) 5. Register the initial user settings and FAX settings from the system menu or the Command Center. 6. Execute the maintenance mode as follows if necessary. No. Main unit related maintenance modes No. Fax related maintenance modes Checking/clearing the maintenance U603 Setting user data 1 U250 cycle U604 Setting user data 2 Checking/clearing the maintenance U610 Setting system 1 U251 counter U611 Setting system 2 Switching between double and single U612 Setting system 3 U253 counts U615 Setting system 6 U260 Selecting the timing for copy counting U625 Setting the transmission system 1 U326 Setting the black line cleaning indication U695 FAX function customize Specific paper feed location setting for U341 printing function Switching between duplex/simplex copy U343 mode Setting the value for maintenance due U345 indication U402 Adjusting margins of image printing Adjusting margins for scanning an U403 original on the contact glass Adjusting margins for scanning an U404 original from the DP Adjusting the leading edge registration U407 for memory image printing U425 Setting the target U429