Kyocera 3JY-003 free download

File name 3JY-003.pdf

Service Bulletin SB Number: SB 3JY-003 Creation Date: 17/04/2008 Subject: System firmware upgrade version 002.009 Model: DF-730 Contents of Item Contents changes 1 Abnormal noise from The finisher reverse roller activates before paper has reverse section. completely gone through the last roller of the machine. Therefore the timing has been changed so that the DF-730 feeds the paper after it has completely passed the last roller of the ma- chine. 2 Motor alignment error After Jam 81 the Print job does restart, however an alignment C8170. motor error could occur when the first sheet of the restarted print job ejects from the machine to the DF-730. This is because the alignment motor stops, instead of initializing after Jam 81. Latest firmware Type Program No. Check SUM Version Status Date for KM-2560/3060/ MAIN (IPU) 5H1_9200.002.009 0454 002.009 2540/3040 as of October 2007 Note See SB 3JY-002 if it is necessary to replace PBA-CONT-F Parts No. Old Parts New Parts Description Q'TY Interchange- SP No. No. ability Old New Old New 1 305H180021 305H180022 PBA-CONT-F 1 1 X O O 5H180021 5H180022 Classification Entire stock rework X In-field modification by case No modification necessary In-field modification at next visit Field measure When above mentioned phenomena occurs, please upgrade the firmware to the newest version. Affected serial Type Serial number numbers DF-730 PRK7X00001 and higher KMIS Service Department, Kyocera Mita Europe Page of 8266 / SB 3JY-003