File information: | |
File name: | samsung_ps42d5sx_chassis_d72a-p_puccini_42d5.zip [preview ps42d5sx chassis d72a-p puccini 42d5] |
Size: | 46272 kB |
Extension: | zip |
Mfg: | Samsung |
Model: | ps42d5sx chassis d72a-p puccini 42d5 🔎 |
Original: | ps42d5sx chassis d72a-p puccini 42d5 🔎 |
Descr: | Samsung Plasma PS42D5SX chassis D72A samsung_ps42d5sx_chassis_d72a-p_puccini_42d5.zip |
Group: | Electronics > Consumer electronics > TV > Plasma |
Uploaded: | 22-06-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name samsung_ps42d5sx_chassis_d72a-p_puccini_42d5.zip Alignment & Adjustment 3. Alignment & Adjustment 3-1 Service Instruction * Check items listed after changing each 1. Main Board replace : ATM Channel fixing and White Balance adjustment 2. Main SMPS Board replace: Vs, Va Voltage check and adjust 5. DC-DC SMPS Board replace : Output voltage check and adjust 6. Logic Board replace : Not adjustment 7 : Y-Main Board replace : Not adjustment 8 : X-Main Board replace : Not adjustment 9 : Buffer Board replace : Not adjustment Samsung Electronics 3-1 Alignment & Adjustment 3-2 How to Access Service Mode Using the Customer Remote 1. Turn the power off and set to stand-by mode. 2. Press the remote buttons in this order; POWER OFF-MUTE-1-8-2- POWER ON to turn the set on. 3. The set turns on and enters service mode. 4. Press the Power button to exit and store data in memory. If you fail to enter service mode, repeat steps 1 and 2 above. 5. Initial SERVICE MODE DISPLAY State Factory AIR 10 Current input mode White Balance uPD64083 ADV7402 Main SDP51 MST9883 ADV7402 Sub DNIe Logic PW318 Option PW318 Upgrade TL945 Upgrade Reset Release Date : XXX XX XXXX XX:XX:XX Code No. : M1 Micom XX Firmware version PW318 T_XXXXXXXXX-XXXX TL945 0.XX The firmware version is subject to change without notice. 4. Buttons operations within Service Mode MENU Full Menu Display / Move to Parent Menu Direction keys / Item Selection by Moving the Cursor Direction keys / Data Increase/Decrease for the Selected Item Source Cycles through the active input source that are connected to the unit 3-2 Samsung Electronics Alignment & Adjustment 3-3 Factory Data The underlined are items applied during the service adjustment. None of the others should be adjusted. Fatory mode OSD Display 1. Calibration 2. Option Table 3. White Balance 4. SVP-EX 5. SAA7119 6. MSP34XX/44XX 7. YC Delay 8. Adjust 9. DNIe 10. Chip Debugger OFF 11. Checksum 12. Reset 13. Spread Spectrum 14. Logic T-PCN42PEUS-XXXX SUB Micom Ver-xxxx 1. Calibration AV Calibration PC Calibration DTV Calibration 2. Option Tabl |
Date | User | Rating | Comment |