File information: | |
File name: | Ñõåìà DVD-5910 Ver. 1.PDF [preview Ñõåìà DVD-5910 Ver. 1] |
Size: | 30651 kB |
Extension: | |
Mfg: | DENON |
Model: | Ñõåìà DVD-5910 Ver. 1 🔎 |
Original: | Ñõåìà DVD-5910 Ver. 1 🔎 |
Descr: | DENON DVD Video Player DVD Video Player Denon - DVD-5910 Ñõåìà DVD-5910 Ver. 1.PDF |
Group: | Electronics > Other |
Uploaded: | 24-06-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name Ñõåìà DVD-5910 Ver. 1.PDF For U.S.A. & Canada model Ver. 1 SERVICE MANUAL MODEL DVD-5910 DVD AUDIO-VIDEO / SUPER AUDIO PLAYER For purposes of improvement, specifications and design are subject to change without notice. Please use this service manual with referring to the operating instructions without fail. Some illustrations using in this service manual are slightly different from the actual set. TOKYO JAPAN X0223-1V.01 DE/CDM 0412 DVD-5910/DVD-A1XV SAFETY PRECAUTIONS LEAKAGE CURRENT CHECK LASER RADIATION 500V 1M (1) (2) (1) (2) 2 DVD-5910/DVD-A1XV WIRE ARRANGEMENT If wire bundles are untied or moved to perform adjustment or parts replacement etc.,be sure to rearrange them neatly as they were originally bundled or placed afterward. Otherwise, incorrect arrangement can be a cause of noise generation. Wire arrangement viewed from the top Front Panel side 3 DVD-5910/DVD-A1XV DISASSEMBLY (Follow the procedure below in reverse order when reassem- bling.) 1. Top Cover (1) Remove 2 rear screws (s1) and 8 top screws (s2), then detach the Top cover. (2) Remove 2 side screws (s3) and 3 top screws (s4), then detach the Side cover(L). (3) Remove 2 side screws (s5) and 3 top screws (s6), then detach the Side cover(R). 4 DVD-5910/DVD-A1XV 2. Front Panel sub Ass'y 2.1. When the Disc tray can be ejected electrically. (1) Switch on, and press [OPEN/CLOSE] button to open the Disc tray. (2) Detach the Loader panel ass'y (c1) by lifting. (3) Close the Disc tray. (4) Disconnect the wires [CX026] [CX035] from the Front panel sub ass'y (a1). (5) Remove 4 top screws (s1) and 4 bottom screws (s1), then detach the Front panel sub ass'y (a1). (6) Disconnect the FFC [CX211] from the Front panel sub ass'y (a1). (7) Remove 4 top screws (s2), then detach the Angle (m1). (Note: This Angle provide on Front and Rear.) (8) Remove both 2 top screws (s3) and (s4), then detach the Angle (m2). (Note: The 2 top screws of s4 provide only Japan model.) 2.2. When the Disc tray cannot be ejected electri- cally. (1) Insert a driver in |
Date | User | Rating | Comment |