NOKIA 6-npd1disass free download

File name 6-npd1disass.pdf

CCS Technical Documentation NPD-1 Series Transceivers Disassembly Issue 1 11/2002 Confidential Nokia Corporation NPD-1 Disassembly CCS Technical Documentation Page 2 Nokia Corporation Confidential Issue 1 11/2002 NPD-1 CCS Technical Documentation Disassembly ESD Protection Step-by-Step Disassembly Instructions 1. Remove the battery cover. 1 Turn phone off. 2 Remove the B-cover by pushing the white button and pushing the cover up as shown above. 3 Remove the A-cover as shown. 4 Remove the battery. Issue 1 11/2002 Nokia Corporation Confidential Page 3 NPD-1 Disassembly CCS Technical Documentation 2. Remove the screws. Remove the six screws using a nonconductive screwdriver. 3. Loosen the LCD assembly. Insert a nonconductive tool on the side of the LCD and carefully snap the LCD assembly out from the D-cover. 4. Remove the LCD assembly. Note: Make sure that the LCD assembly is completely loose from the D-cover snaps to min- imize the risk of bending the LCD board. Page 4 Nokia Corporation Confidential Issue 1 11/2002 NPD-1 CCS Technical Documentation Disassembly 5. Separate the PWB from the D-cover assembly. The PWB (shown at left) can be removed by lifting it up from the guide pins in the D-cover. 6. Antenna removal. Antenna: Apply pressure with a nonconductive tool to snap the antenna out from the D-cover. Note: The antenna should not be removed unless it has been verified as a faulty part. The antenna must be replaced after removal. 7. Remove remaining parts as needed. Other assembly items: You may lift out any additional assembly items, as required. Issue 1 11/2002 Nokia Corporation Confidential Page 5 NPD-1 Disassembly CCS Technical Documentation Page 6 Nokia Corporation Confidential Issue 1 11/2002