Konica Minolta 7020FV2E free download

File name 7020FV2E.PDF

ISW 2 4 DIAGRAMS 3 SERVICE 2 ISW 1 OUTLINE ISW 1 OUTLINE ISW [1] Description of the ISW [2] Operating method ISW (In-System Writer) is an operation rewriting control 1. ISW connector programs stored in the flash ROM included in the diverse The ISW connector is provided on the right side face control board of a Konica digital copier with the board still of the copier. Of the two connectors situated in the installed in the copier main body. side face, the lower one is the ISW connector. By implementing ISW you can update versions of control The connector for the "ISW Tool" is installed between programs without changing the board or carry out the ISW connector (36-pin) and the KRDS connector 2 ISW maintenance of the control board when changing the (25-pin). The cap or seal that covers each connector board. must be removed before the connector can be used. Two ISW execution tools are prepared. One is the "ISW Trns" (PC software) that implements rewriting by connecting a personal computer (PC) and a digital copier. KRDS connector And, the other is the specialized "ISW Tool" featuring EPROM. These tools allow direct rewriting of the control program in the flash ROM included in the copier main body by connecting the ISW connector of the copier main body. 3 SERVICE This document describes only the setup procedures required for the 7020 series to execute the ISW. For the operation of the "ISW Trns" and "ISW Tool," refer to the "Konica ISW (In-System Writer) Instruction DC5V Manual." jack Caution: The "Konica ISW (In-System Writer) In- struction Manual" describes three different ISW connector