TOSHIBA MP4001 free download

File name MP4001.PDF

SERVICE CAPACITY FEEDER LARGE MANUAL MP-4001 Click the Page Only button to close the overview area of the window. Click the Bookmarks and Page button to open the Contents and display bookmarks created for the document. Click a bookmark's name to go to the Page marked by that bookmark. Click the Thumbnails and Page button to open the overview area and display thumbnail images of each document page. Click a thumbnail to go to the page marked by that thumbnail. Copyright TOSHIBA CORPORATION 1995 ALL RIGHTS RESERVED GENERAL PRECAUTIONS FOR INSTALLATION/SERVICING/ MAINTENANCE 1. When installing the Large Capacity Feeder MP-4001 to the Copier, be sure to follow the instructions described in the "Unpacking /Set-Up Procedure for the MP-4001" sheet which comes with each unit of the MP-4001. The MP-4001 should be installed by an authorized/qualified person. 2. The MP-4001 weighs about 18 kg (39.7 lbs.). When lifting or carrying it, hold the plastic guide firmly with your right hand and (open the pa- per supply door) place your left hand under the top frame. Then lift or carry the MP-4001. 3. Before starting installation, servicing or maintenance work, be sure to turn off and unplug the copier first. 4. The MP-4001 is supplied with power from the copier, requiring no ad- ditional power source. 5. The MP-4001 should be grounded to the specified positions on the machine frame. 6. When servicing or maintaining the MP-4001, be careful about the ro- tating or operating sections such as gears, pulleys, sprockets, cams, belts, etc. 7. When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise noted in this manual or other related documents. Be sure to reassem- ble small parts such as screws, washers, pins, E-rings, toothed washers to the correct places. 8. Basically, the machine should not be operated with any parts removed or disassembled. 9. Delicate parts for preventing safety hazard problems (such as thermofuses, door switches, sensors, etc. if any) should be handled/installed/adjusted correctly. 10. During servicing or maintenance work, be sure to check the nameplate and other cautionary labels (if any) to see if they are clean and firmly stuck. If not, take appropriate actions. 11. For the recovery and disposal of used MP-4001s, consumable parts and packing materials, it is recommended that the relevant local regulations/rules should be followed. 12. Precautions Against Static Electricity