Pioneer AVIC-9DVD free download

File name Pioneer AVIC-9DVD.pdf

Service Manual ORDER NO. CRT2709 DVD NAVIGATION UNIT AVIC-9DVD UC - This service manual should be used together with the following manual(s): Model No. Order No. Mech. Module Remarks CX-954 CRT2670 MS2 DVD Mech. Module:Circuit Description, Mech.Description, Disassembly - Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trade- marks of Dolby Laboratories. - This product has the unit part numbers as below. Unit Part No. Description CPN1746 Main Assy *) The unit part numbers listed above are not for the service components. - For your inspection, the following extention cords are supplied. Use them if necessary. Part to use Part No. Main PCB (CN3251) <--> DVD Core Unit V (CN1701) GGD1170 Main PCB (CN3254) <--> CC Unit (CN302) GGD1264 Main PCB (CN3901) <--> Interface PCB (CN5004) GGD1171 Main PCB (CN552) <--> GPS Unit (CN461) GGD1265 CC Unit (CN2) <--> DVD Core Unit V (CN1401) GGD1268 PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A. PIONEER EUROPE NV Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936 C PIONEER CORPORATION 2001 K-ZZY. JUNE 2001 Printed in Japan AVIC-9DVD - DVD Player Service Precautions 1. Never adjust the LD VR in the pickup unit to protect the pickup from electrical damages. 2. For pickup unit(service)(CXX1530) handling, please refer to"Disassembly"(see page 164). During replacement, handling precautions shall be taken to prevent an electrostatic discharge(set the short switch of the pickup unit to the SHORT side). 3. During disassembly, be sure to turn the power off since an internal IC might be destroyed when a connector is plugged or unplugged. 4. Please adjusting the skew after changing the pickup unit(see page 123). - High voltage is generated in the inverter when the power is supplied to the system. To avoid an electric shock, reconfirm that the power switch is set to OFF before starting operation. - Check of installation direction when G-Sensor Unit was after repair. Forward / Aft direction of vehicle Lock-screw Front Parallel Parallel