DENON Service Bulletin DZ10-087 free download

File name Service Bulletin DZ10-087.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : DZ10-087 Date: June 22, 2010 _____________________________________________________________ Model: S-5BD Subject: Recovery of the Firmware with CD-R. Countermeasure is applicable only upon claim from the customer. Symptom: Update via DPMS might abort with "File Load Error". Solution: We corrected the firmware so that malfunction might not occur. MODIFICATION: We will supply the following program file to recovery/update the Firmware of the subject models. Preparation of failure indicated unit. 1) Remove Ethernet cable from unit. 2) Pull out AC cable of unit from AC socket on the wall. 3) Insert AC cable to the AC socket. 4) While pushing the "SOURCE" and "SKIP FWD" button, press the "ON/STANDBY" button continuously. 5) The FL Display will flash all segments and no segment repetition. 6) Release your fingers from the "SOURCE" and "SKIP FWD" buttons. 7) The display on the FL Display switches to "INITIALIZING" / "Please_Wait" > "BD/SD" / "INITIALIZING" > "BD/SD" / "INITIALIZED" and initialization is completed. 8) Afterwards, it enters the "FIRST SETUP" mode. 9) Push the "RETURN" button on wireless remote controller. 10) The "Cancel Setup?" will be indicated on the upper stage of FL Display. 11) The "Yes or No: Yes". 13) Press the "ENTER" button on wireless remote controller. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Complete rewrite procedures for the BE ROM (IC110). We will supply the following program files for updating the subject models. Therefore, please record each program file on a blank CD-R separately, and update the unit upon claim. Note: Upon recording the Disc: a) Do not use the "Multi Session" mode. b) When recording the supplied file on the blank CD-R, the format shall be "ISO9660+Joliet". c) Mode shall be "MODE1". d) When recording the supplied file on the disc, please use the proper recording speed that is available on your PC. e) The burning method shall be "Disc at O