Minolta 8031FV3E free download

File name 8031FV3E.PDF

FrameMaker Ver.5.5E(PC) 8020/8031 DIS/REASSEMBLY, ADJUSTMENT 02.08.19 DIS/REASSEMBLY, ADJUSTMENT FrameMaker Ver.5.5E(PC) 8020/8031 DIS/REASSEMBLY, ADJUSTMENT 02.08.19 Blank page FrameMaker Ver.5.5E(PC) 8020/8031 DIS/REASSEMBLY, ADJUSTMENT 02.08.19 1. SERVICE INSTRUCTIONS 1-1. IDENTIFICATION OF FUSES DC Power Supply 3 PU201 F1: 250 V 5 A F100: 250 V 3.15 A DC Power Supply 2 PU2 4025D001AA 100 V Area F1: 125 V 4 A 200 V Area F1: 250 V 4 A DC Power Supply 1 PU1 100 V Area F1: 250 V 15 A F2: 250 V 15 A F3: 250 V 15 A F4: 250 V 15 A 200 V Area F1: 250 V 8 A F2: 250 V 8 A F3: 250 V 8 A F4: 250 V 8 A DC Power Supply 1 PU1 F101: 250 V 3.15 A F102: 250 V 3.15 A 4025D002AB F103: 250 V 3.15 A F104: 250 V 3.15 A D-1 FrameMaker Ver.5.5E(PC) 8020/8031 DIS/REASSEMBLY, ADJUSTMENT 02.08.19 1-2. PARTS WHICH MUST NOT BE TOUCHED (1) Red painted Screws Purpose of Application of Red Paint Red painted screws show that the assembly or unit secured can only be adjusted or set at the factory and should not be adjusted, set, or removed in the field. Note that when two or more screws are used on the part in questions, only one representa- tive screw may be marked with red paint. (2) Variable Resistors on Board Do not turn the variable resistors on boards for which no adjusting instructions are given in "ADJUSTMENT." D-2 FrameMaker Ver.5.5E(PC) 8020/8031 DIS/REASSEMBLY, ADJUSTMENT 02.08.19 2. DISASSEMBLY/REASSEMBLY 2-1. DOORS, COVERS, AND EXTERIOR PARTS: IDENTIFICATION AND REMOVAL PROCEDURES 1 2 7 8 3 4 6 5 9 4025D003AA 4025D004AA No. Name Removal Procedure Remove the IR Upper Right Cover. Remove one screw and the 1 Original Glass Original Glass fixing brackets (front and rear). Remove the Origi- nal Glass. IR Upper Right 2 Remove three screws and the IR Upper Right Cover. Cover Remove the four caps on both sides of the control panel. 3 Control Panel Remove four screws and the flat cable. Remove the control panel. Remove the