File information: | |
File name: | Service Bulletin OST-F1566.PDF [preview Service Bulletin OST-F1566] |
Size: | 198 kB |
Extension: | |
Mfg: | DENON |
Model: | Service Bulletin OST-F1566 🔎 |
Original: | Service Bulletin OST-F1566 🔎 |
Descr: | DENON AV Surround Receiver & Amplifier AV Surround Receiver & Amplifier Denon - AVR-4310CI & AVC-4310 Service Bulletin OST-F1566.PDF |
Group: | Electronics > Other |
Uploaded: | 14-08-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name Service Bulletin OST-F1566.PDF 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1566 Date: August 28, 2009 _____________________________________________________________ Model: AVR-4310CI Subject: Correction of the Firmware via DPMS (Denon Product Management Server). Countermeasure is applicable only upon claim from the customer. Symptom: 1) A/V receiver and DVD-A1UDCI/A1UD are connected with DENON LINK 4th. When a specific disc is reproduced, the sound might not be emitted. 2) The sound might not be emitted while specific BD software is reproducing. 3) The bit rate of iPod displayed on the GUI screen was deleted. 4) Preset information on Internet radio/media server is not maintained when turning off power. 5) Because the Rhapsody server becomes SSL correspondence, the log in processing is changed. 6) ASD-51 cannot be recognized on the network when ASD-51 is connected, and neither Party Mode nor Network Status operates. 7) The communication fault might occur when Audyssey Pro is used. Solution: We corrected the firmware so that no malfunction occurs. Read me at first! Please initialize the unit before updating the firmware if you have never updated the firmware of the unit via "DPMS". When you already updated the firmware of the unit via "DPMS", it is not necessary to initialize the unit again. 1) Turn off the "Power switch" of unit. 2) Open the door on the front panel. 3) While holding the "" and "" buttons (SYSTEM CONTROL) down simultaneously, turn the "Power switch" on. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. 4) The FL Display indicates all digits at interval a second. 5) Turn off the "Power switch" of the unit. 6) Please update the firmware of the unit via DPMS. (Go to item 7-1.) Caution: It is necessary to initialize the unit before the update work begins. The customer has to initialize their A/V product. Please update the firmware after you confirm this matter to the customer beforehand. METHOD OF UPDATE via DPMS (Denon Product Management Server) Denon new networking feature with DPMS (Denon Product Management Server) allows us to provide advanced service to the customers and create new busines |
Date | User | Rating | Comment |