MAKITA 9035KB-TE free download

File name 9035KB-TE.pdf

T ECHNICAL INFORMATION Models No. 9035KB New Tool Description Finishing sander CONCEPTION AND MAIN APPLICATIONS Developed as the compact type Finishing sander, wherein the built-in dust collecting function protects the operator from ruining his health and further provides less vibration and the longer continuous operation. Specifications Volt(V) Current(A) Frequency(HZ) Continuous rating input(W) 100 5.5 50, 60 520 No load speed 5500 RPM Pad size 93 x 185 mm Overall length of machine 270 mm Net Weight 3 kg Power supply cord 2.5m Standard equipment Sanding paper set--------One set(for processing wood) (Particle size : #60, #100, #150 --- 2 pieces for each) Optional accessories Sanding paper[Size : 93 mm x 228 mm(Three-divided of standard size)] Particle size #60, #100, #150------ One set of the same type 10 pieces(for processing wood) Features and benefits 1. The built-in dust proof function enables the healthy operation for human body without generating dust.(No similar product in the same type made in domestic) 2. The large circle motion with the orbit diameter of 5 mm and 5500 RPM/min. enable the extremely high working efficiency. (See the page 2/3 for the comparison with other models.) 3. The light weight, compact model and easy-to-handle structure are most suitable for the longer continuos operation. 4. The double insulation structure gives no concern for getting an electrical shock. 5. For polishing the undercoating and finish-coating of any wooden products, finishing the joint on the plaster board etc., surface-finishing of the stone material, and if the paper for metal is attached, it can be used for removing the rust on the metal product, polishing the undercoating and removing the coat. The standard equipment for the tools shown may differ from country to country. Repair 1) Assembling of motor a) Make fit the key groove of the fan to the position of pin 4 inserted into the armature shaft while lapping the fan 80 on the separator and use the arbor press for getting the right angle to insert the fan 80 and the armature shaft. At this time simultaneously insert the ball bearing. b) Assemble the armature while using care not to drop the flat washer 14 at rear of armature with the motor housing faced up. c) Do not insert the fan 80 into the armature twice. (If the fan 80 made from aluminum is disconnected