MAKITA JN3200-TE free download

File name JN3200-TE.pdf

T ECHNICAL INFORMATION Models No. JN3200 New Tool Description MAKITA Nibbler CONCEPTION AND MAIN APPLICATIONS The Nibbler JN3200 was developed to serialize Nibblers followed #JN1600 as well as to promote our sales in metal machine industry. The main body is double-insulation structure so that it may be very easy to use and so small in both weight and size with good durability. Specifications Voltage (V) Current (A) Cycle (Hz) Continuous rating input (W) 100 7.0 50/60 660 Maximum Capacity(mm) Soft steel plate 3.2mm Stainless plate 2.5mm Cut width(mm) 8mm Skinned lower hole 42mm or more Minimum cut radius(mm) Inside 120mm Outside 128mm No. of Striking(/min) 1300 Overall length(mm) 215mm Net Weight 3.4kg Power supply cord(m) 2.5m Standard equipment Washer ---2 pieces( adjusting height for attaching dice). Spanner50----1 piece(attach/remove locknut) Hexagonal stick spanner 3------1 piece(attach/remove die) Optional accessories Punch Die Features and benefits 1) You can work by one hand easily because of light-weight handy type 2) Copying cut of straight/curved line is very easy 3) As the die(die casting)can be regrinded, it is economical 4) You can adjust insert intervals of materials and decrease vibration at cutting 5) Max. Capacity Indication Gauge(Plate-thickness-gauge)is attached 6) If you make a lower hole over 42mm, you can treat skinning in the middle 7) As it is easy to see the cut part, you can follow the marking off line exactly The standard equipment for the tools shown may differ form country to country. Repair Disassembly/Assembly 1) Exchange of Punch Hitch the accessory spanner50 to a small hole in outer circumference of locknut, hit the handle slightly with hammer, and remove the locknut(Turned left, and it becomes loose). Take off the die holder , remove screws by turning left, and the punch will comes off. In assembly, be sure to fasten tightly both locknut and screws. If they becomes loose during operation, the gear may be broken or the motor may be burnt. 2) Assembly of Inner part of Gear housing Since the structure is the same as that of #JN1600, you can assemble in the same way. Also, be careful well so that the stop ring or washer m