DENON Update Instruction AVR-1910 free download

File name Update Instruction AVR-1910.PDF

2009/7/28 V01 AVR-1910/1610/1620/790/590 Firmware Update Instruction (Common for AVC-1620) Nr. Contents Tools Remarks Follow this instruction and the operating instructions for service(1) PC with RS-232C terminal Commercially avaiable parts kit = "00DSPK-581 WRITING UNIT" which to be used with(2) RS-232C cable 9P, D-sub, StraighCommercially avaiable 1 Writer Starter = "m3a0806v020046exe.zip" File size : 345,864 bytes (0.32 Mbytes) "FlashSta.exe" Please download the Writer Starter software "Flash Available in SDI or web. Programmer M16C Flash Starter M3A-0806 Software Ver.2.0.0.46 Upgrade" from SDI or below URL. 2 Program File = "AVR1910_1610_Main Ver00.85.mot" Available in SDI. 3 Jig setting and the connection between jig and main unit. Connect CP1015 on MAIN PWB and CX707 on JG209-10 with 8P connector cable. Set all the slide switch into the position as follows. S702 VCSEL : 5V Service parts kit: Avaiable for service S706 CNVSS : H 00DSPK-581 WRITING UNIT 8P connection cable included S707 EPM : L S708 CE : H S709 DSPBOOT : H S702 VCSEL : 5V CP1015 on MAIN B'd S706 CNVSS : H S707 EPM : L S708 CE : H S709 DSPBOOT : CX707 on JG209-10. Caution! Do not turn on the power of A/V amplifier, when A/V amplifier connects the "00DSPK-581 WRITING UNIT" with 8p connector cable. Because the customer's setting of A/V amplifier will be lost. 4 How to set main unit into firmware update mode. Put POWER ON/OFF switch on while pressing "Surround <" + "MENU" (for all models) buttons on front panel of main unit. No LED and FL display should be lit (firmware update mode.) 5 Operation with writer software. Procedure of writing software. 1) Start up "Flash Starter M3A-0806 Ver2.0.0.46" on PC. 2) Window of "FlashSta.exe" 3) Double click the file name of the "FlashSta.exe". 3) Click the "OK" button. 4) If A/V amplifer does not connect to "00DSPK-581 WRITING UNIT" (or PC) properly or Setting of the "0