DENON Service Bulletin OST-F1549 free download

File name Service Bulletin OST-F1549.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1549 Date: August 4, 2009 _____________________________________________________________ Model: AVR-4310CI Subject: Correction of the Firmware via DPMS (Denon Product Management Server). Countermeasure is applicable only upon claim from the customer. Symptom: 1) When the Main microcomputer by DPMS is updated, an unnecessary character might be displayed in the FL Display. 2) The GUI display might become abnormal when entering Menu when the equipment is connected with the HDMI input and HDMI Monitor is not connected. 3) When the video signal of a specific resolution is scaled and the video signal is output from the HDMI terminal, the video signal of the resolution to which TV cannot be displayed might be output. 4) When the AV amplifier is connected with specific TV with the HDMI cable, the picture might not be correctly displayed. 5) When the voice stream of "DTS-HD High Resolution" is input to the AV amplifier, the sound might not be emitted. Solution: We corrected the firmware so that no malfunction occurs. MODIFICATION: After initializing the units, please update the firmware via DPMS. 1) Turn off the "Power switch" of unit. 2) Open the door on the front panel. 3) While holding the "" and "" buttons (SYSTEM CONTROL) down simultaneously, turn the "Power switch" on. 4) The FL Display indicates all digits at interval a second. 5) Turn off the "Power switch" of the unit. 6) Please update the firmware of the unit via DPMS. (Go to item 7-1.) ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Caution: It is necessary to initialize the unit before the update work begins. The customer has to initialize their A/V product. Please update the firmware after you confirm this matter to the customer beforehand. Updating the firmware (Refer to the Instruction Manual.) 1) Turn the Power Supply of the unit off. 2) Connect the Ethernet terminal of the unit to the Network line by Ethernet straight cable. (Don't use Ethernet cross cable.) 3) The connection of the network recommends the Ethernet cable for certain update. 4) Turn the Power Supply of the