DISNEY DVD Player and VCR DVD2100-C Parts and Service Manual free download

File name Disney_DVD_Player_and_VCR_DVD2100-C_Parts_and_Service_Manual.zip

CLASS 1 LASER PRODUCT DVD2100-C SERVICE MANUAL DVD VIDEO PLAYER & VHS VIDEO CASSETTE RECORDER ORIGINAL MFR'S VERSION A Design and specifications are subject to change without notice. IMPORTANT WARNING CAUTION: DVD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY AS INSTRUCTED. THE FOLLOWING CAUTION LABEL IS LOCATED ON THE REAR PANEL OF THE PLAYER. CLASS 1 LASER PRODUCT (Printed on the Rear Panel) WHEN THIS PLAYER IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS PLAYER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 3. PUT PARTS AND WIRES IN THE As for the places which need special attentions, ORIGINAL POSITION AFTER they are indicated with the labels or seals on the ASSEMBLING OR WIRING cabinet, chassis and parts. Make sure to keep the There are parts which use the insulation indications and notices in the operation manual. material such as a tube or tape for safety, or which are assembled in the condition that 2. USE THE DESIGNATED PARTS these do not contact with the printed board. The parts in this equipment have the specific The inside wiring is designed not to get closer characters of incombustibility and withstand to the pyrogenic parts and high voltage parts. voltage for safety. Therefore, the part which is Therefore, put these parts in the original replaced should be used the part which has positions. the same character. 4. PERFORM A SAFETY CHECK AFTER Especially as to the important parts for safety which is indicated in the circuit diagram or the SERVICING table of parts as a mark, the designated Confirm that the screws, parts and wiring which parts must be used. were removed in order to service are put in the original positions, or whether there are the