Aiwa NSX-SZ2 free download

File name NSXSZ 2 Rev.pdf

NSX-SZ2 HR, EZ SERVICE MANUAL COMPACT DISC STEREO CASSETTE RECEIVER BASIC TAPE MECHANISM : ZZM-2 APR1NC BASIC CD MECHANISM : 3ZG-3 E8NC SYSTEM NSX-SZ2 (HR) CX­NSZ2 NSX-SZ2 (EZ) SX-NSZ2 RC­AAS08 CD CASSEIVER SPEAKER REMOTE CONTROLLER · This Service Manual is the "Revision Publishing" and replaces "Simple Manual" NSX-SZ2 (HR, EZ), (S/M Code No. 09-007-433-7T1). S/M Code No. 09-009-433-7R1 RE VI SIO DA N TA SPECIFICATIONS Tuning range Usable sensitivity (IHF) Antenna terminals Tuning range Usable sensitivity Antenna Tuning range Usable sensitivity Antenna Power output 87.5 MHz to 108 MHz HR: 13.2 dBf EZ: 16.8 dBf 75 ohms (unbalanced) Track format Frequency response Recording system Heads 4 tracks, 2 channels stereo 50 Hz ­ 8000 Hz AC bias Deck 1: recording/playback x 1, erase x 1 Deck 2: playback x 1 531 kHz to 1602 kHz (9kHz step) 530 kHz to 1710 kHz (10 kHz step) 350 µV/m Loop antenna Laser Semiconductor laser ( =780 nm) Speaker system Speaker units Impedance Dimensions (W x H x D) Weight Power requirements 144 kHz to 290 kHz 1400 µV/m Loop antenna 1 way, bass reflex Full range: 100 mm cone 6 ohms 196 x 301 x 198 mm 1.8 kg Total harmonic distortion Inputs Outputs HR: Rated: 8 W + 8 W (6 ohms, T.H.D. 1 %, 1 kHz) Reference: 10 W + 10 W (6 ohms, T.H.D. 10 %, 1 kHz) EZ: Rated: 8 W + 8 W (6 ohms, T.H.D. 1 %, 1 kHz/DIN 45500) Reference: 10 W + 10 W (6 ohms, T.H.D. 10 %, 1 kHz/DIN 45324) DIN MUSIC POWER: 24 W + 24 W 0.1 % (5 W, 1 kHz, 6 ohms, DIN AUDIO) VIDEO/AUX: 500 mV SPEAKERS: 6 ohms or more PHONES: 32 ohms or more Power consumption Dimensions (W x H x D) Weight HR: 120 V / 220 - 230 V/ 240 V AC (switchable), 50 Hz / 60 Hz EZ: 230 V AC, 50 Hz HR: 39 W EZ: 43 W 260 x 302.5 x 266 mm 3.5 kg · Specifications and external appearance are subject to change without notice. ­2­ PROTECTION OF EYES FROM LASER BEAM DURING SERVICING This set employs laser. Therefore, be sure to follow carefully the instructions below when servicing. CAUTION Use of controls or adjustments or performance of procedures other than those specified herin may result in hazardous radiation exposure. WARNING!! WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 30cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK. s Caution: Invisible laser radiation when open and interlocks defeated avoid exposure to beam. Advarsel: Usynlig laserstеling ved еbning, nеr sikkerhedsafbrydere er ude af funktion. Undgе udsжttelse for strеling. ATTENTION L'utillisation de commandes, rйglages ou procйdures autres que ceux spйcifiйs peut entraоner une dangereuse exposition aux radiations. ADVARSEL Usynlig laserstеling ved еbning, nеr sikkerhedsafbrydereer ude af funktion. Undgе